Product Details | CONTROL TRANSFORMER SYNCHRO

5990-00-850-8206 A synchro consisting of a stator and rotor inductively coupled. The electrical output of the rotor is dependent upon both the position of the rotor and the electrical input to the stator from a transmitter synchro or a differential synchro. Does not include variable resistors, goniometers, or variable transformers.

Part Alternates: R5021A, R502-1A, 5990-00-850-8206, 00-850-8206, 5990008508206, 008508206

Electrical and Electronic Equipment Components | Synchros and Resolvers

Supply Group (FSG) NSN Assign. NIIN
59 01 JAN 1962 00-850-8206

Drawings & Photos | NSN 5990-00-850-8206


Cross Reference | NSN 5990-00-850-8206

Part Number Cage Code Manufacturer
R502-1A 88818 KEARFOTT CORPORATION DBA KEARFOTT

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5990-00-850-8206

Technical Data | NSN 5990-00-850-8206

Characteristic Specifications
BODY SIZE 11
STATOR INPUT VOLTAGE RATING IN VOLTS 11.8 NOMINAL
STATOR INPUT CURRENT RATING 86.0 MILLIAMPERES NOMINAL
STATOR INPUT ELECTRICAL POWER RATING 90.0 MILLIWATTS NOMINAL
FREQUENCY IN HERTZ 400.0 NOMINAL
ZSO IMPEDANCE MAGNITUDE IN OHMS 135.00 NOMINAL
ZSO IMPEDANCE ANGLE IN DEG 80.00 NOMINAL
TRANSFORMATION RATIO 2.203 ROTOR TO STATOR NOMINAL
PHASE SHIFT ANGLE IN DEG 4.000 OUTPUT TO INPUT NOMINAL
MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT 20.00 OUTPUT
MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT 30.00
ELECTRICAL ERROR ANGULAR RANGE IN MINUTES -7.0 TO 7.0
ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS 4.00 CENTIMETER-GRAMS NOMINAL
BODY STYLE A3 STANDARD ROUND C
SHOULDER DIAMETER 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM
PILOT DIAMETER 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM
OVERALL LENGTH 2.1610 INCHES NOMINAL
FLANGE DIAMETER 1.0570 INCHES MINIMUM AND 1.0650 INCHES MAXIMUM
FLANGE THICKNESS 0.0930 INCHES NOMINAL
UNDERCUT DIAMETER 0.9750 INCHES NOMINAL
UNDERCUT WIDTH 0.0500 INCHES NOMINAL
PILOT LENGTH 0.0620 INCHES NOMINAL
SHOULDER LENGTH 0.0620 INCHES NOMINAL
MOUNTING SURFACE TO TERMINAL END DISTANCE 1.7940 INCHES NOMINAL
ALIGNMENT HOLE DEPTH 0.0990 INCHES MINIMUM
ALIGNMENT HOLE BOLT CIRCLE DIAMETER 0.8120 INCHES NOMINAL
ALIGNMENT HOLE QUANTITY 4
SHAFT TYPE ROUND, SLOTTED SINGLE SHAFT
SHAFT DIAMETER 0.3670 INCHES NOMINAL SINGLE SHAFT
SHAFT LENGTH 0.3670 INCHES NOMINAL SINGLE SHAFT
SHAFT SLOT DEPTH 0.0300 INCHES NOMINAL SINGLE SHAFT
SHAFT SLOT WIDTH 0.0300 INCHES NOMINAL SINGLE SHAFT
TERMINAL TYPE AND QUANTITY 5 SCREW
TERMINAL LOCATION REAR
BODY MATERIAL STEEL, STAINLESS
MANUFACTURERS CODE 88818
DESIGN CONTROL REFERENCE R502-1A

Restrictions/Controls & Freight Information | NSN 5990-00-850-8206

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:UPrecious metal type is unknown
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 061700 ELEC APPLIANCES/INSTRUMENTS NOI
Less than car load rating
Less than truck load rating W Rating Variable
Water commodity Code 658 unknown
Originating Activity Code XX
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable