Product Details | CONTROL TRANSFORMER SYNCHRO

5990-01-074-6549 A synchro consisting of a stator and rotor inductively coupled. The electrical output of the rotor is dependent upon both the position of the rotor and the electrical input to the stator from a transmitter synchro or a differential synchro. Does not include variable resistors, goniometers, or variable transformers.

Part Alternates: CDH-8-A-08/L994, CDH8A08L994, 77600002-1, 5990-01-074-6549, 01-074-6549, 5990010746549, 776000021, 010746549

Electrical and Electronic Equipment Components | Synchros and Resolvers

Supply Group (FSG) NSN Assign. NIIN
59 06 APR 1979 01-074-6549

Drawings & Photos | NSN 5990-01-074-6549


Demand History | NSN 5990-01-074-6549

Part Number Request Date QTY Origin
5990-01-074-6549 2016-10-278 16 DIBBS
5990-01-074-6549 2016-01-14 11 DIBBS
5990-01-074-6549 2016-01-05 10 DIBBS
5990-01-074-6549 2015-12-361 11 DIBBS
5990-01-074-6549 2007-12-356 3 DIBBS
5990-01-074-6549 2007-10-289 5 DIBBS

Cross Reference | NSN 5990-01-074-6549

Part Number Cage Code Manufacturer
77600002-1 1K426 MOOG INC. DBA MOOG COMPONENTS GROUP
77600002-1 99932 MOOG INC. DBA MOOG COMPONENTS GROUP
CDH-8-A-08/L994 99932 MOOG INC. DBA MOOG COMPONENTS GROUP

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5990-01-074-6549

Technical Data | NSN 5990-01-074-6549

Characteristic Specifications
ZSO RESISTANCE IN OHMS 108.00 NOMINAL
PLUS J ZSO REACTANCE IN OHMS 440.00 MINIMUM AND 460.00 MAXIMUM
BODY STYLE A1 STANDARD ROUND A
PILOT DIAMETER 0.4095 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM
OVERALL LENGTH 1.7280 INCHES MINIMUM AND 1.7580 INCHES MAXIMUM
FLANGE DIAMETER 0.7490 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM
FLANGE THICKNESS 0.0620 INCHES NOMINAL
UNDERCUT DIAMETER 0.6880 INCHES MINIMUM AND 0.6910 INCHES MAXIMUM
UNDERCUT WIDTH 0.0620 INCHES NOMINAL
PILOT LENGTH 0.0430 INCHES NOMINAL
MOUNTING SURFACE TO TERMINAL END DISTANCE 1.3680 INCHES NOMINAL
SHAFT TYPE ROUND SINGLE SHAFT
SHAFT DIAMETER 0.0895 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM SINGLE SHAFT
SHAFT LENGTH 0.3600 INCHES MINIMUM AND 0.3900 INCHES MAXIMUM SINGLE SHAFT
TERMINAL LOCATION REAR
BODY MATERIAL ANY ACCEPTABLE
III FRAGILITY FACTOR MODERATELY RUGGED
MANUFACTURERS CODE 1K426
MFR SOURCE CONTROLLING REFERENCE 77600002-1

Restrictions/Controls & Freight Information | NSN 5990-01-074-6549

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 061700 ELEC APPLIANCES/INSTRUMENTS NOI
Less than car load rating
Less than truck load rating W Rating Variable
Water commodity Code 658 unknown
Originating Activity Code SU Ogden Air Logistics Center
Hill AFB, UT 84056-5609
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5990-01-074-6549

Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Price ValidationV The current standard price has been validated.
  • The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
  • The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
  • ZOP or Standard price challenges are permissible but must be supported by adequate justification.
Materiel Management Aggregation CodeWFSU:F-16 AIR COMBAT FIGHTER
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each