Product Details | RADIO FREQUENCY REFLECTION ISOLATOR

5985-00-931-2003 A device which allows radio frequency energy to pass in one direction with very little power loss, but blocks the flow of energy in the other direction by means of multiple WAVE-polarization or an integral dissipative load. It isolates frequency sensitive circuity from the effects of reflected radio frequency energy resulting from component mismatch. It usually has one or more ports terminated with coaxial connector(s) and/or waveguide flange(s); or other electrical terminations. Isolators designed for internal use in waveguide runs may consist of rods, rings, chips, strips and the like and have no ports or terminations. See also DIPLEXER; DUPLEXER. Excludes CIRCULATOR, RADIO FREQUENCY.

Part Alternates: C994100105, 5985-00-931-2003, 00-931-2003, 5985009312003, 009312003

Electrical and Electronic Equipment Components | Antennas, Waveguides, and Related Equipment

Supply Group (FSG) NSN Assign. NIIN
59 14 SEP 1966 00-931-2003

Cross Reference | NSN 5985-00-931-2003

Part Number Cage Code Manufacturer
C994100105 01220 SYSTRON-DONNER CORP MICROWAVE/INSTRUMENT DIV
C994100105 C1834 KONTRON AG

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5985-00-931-2003

Technical Data | NSN 5985-00-931-2003

Characteristic Specifications
FREQUENCY RANGE RATING 85.0 TO 96.0 GIGAHERTZ
OVERALL LENGTH 2.160 INCHES NOMINAL
OVERALL WIDTH 2.000 INCHES NOMINAL
OVERALL HEIGHT 1.873 INCHES NOMINAL
FLANGE QUANTITY 2
FLANGE TYPE COVER
FLANGE CONNECTION FACILITY QUANTITY 4
FLANGE CONNECTING HOLE DIAMETER 0.164 INCHES NOMINAL
FLANGE CONNECTING HOLE THREAD SIZE 8-32
FLANGE CONNECTING HOLE SPACING SPACED ON 1.352 IN. BY 1.352 IN. MTG CENTERS
LENGTH 1.625 INCHES NOMINAL
WIDTH 1.625 INCHES NOMINAL
MANUFACTURERS CODE 01220
DESIGN CONTROL REFERENCE C994100105

Restrictions/Controls & Freight Information | NSN 5985-00-931-2003

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:BMunitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.)
Precious Metals Indicator Code:UPrecious metal type is unknown
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 061700 ELEC APPLIANCES/INSTRUMENTS NOI
Less than car load rating W Rating Variable
Less than truck load rating W Rating Variable
Water commodity Code 658 unknown
Originating Activity Code ZG Germany
ZH
ZJ
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable