Product Details | REACTOR

5950-00-511-8675 A coil or coils usually constructed with cores having low magnetic reluctance, whose primary purpose is to furnish an inductive impedance in power or audio frequency circuit ranging from zero to 20 kilohertz (kilocycles). Includes audio frequency and power filter chokes, audio reactors and swinging chokes. Does not include transformers or coils used above audio frequency range. Excludes SATURABLE REACTOR. For reactors with air cores, see COIL (as modified).

Part Alternates: A9170, TTI2772, 5950-00-511-8675, 00-511-8675, 5950005118675, 005118675

Electrical and Electronic Equipment Components | Coils and Transformers

Supply Group (FSG) NSN Assign. NIIN
59 30 JUL 1974 00-511-8675

Cross Reference | NSN 5950-00-511-8675

Part Number Cage Code Manufacturer
A9170 81535 AERONAUTICAL COMMUNICATIONS EQUIPMENT INC
TTI2772 96253 TRANSFORMER TECHNICIANS INC

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5950-00-511-8675

Technical Data | NSN 5950-00-511-8675

Characteristic Specifications
TERMINAL TYPE AND QUANTITY 2 STANDOFF, THREADED STUD
WINDING OPERATING CURRENT 30.0 MILLIAMPERES DC MINIMUM AND 830.0 MILLIAMPERES DC MAXIMUM SINGLE COMPONENT SINGLE WINDING
DC RESISTANCE RATING IN OHMS 29.000 SINGLE COMPONENT SINGLE WINDING
INDUCTANCE RATING 20.00 HENRY MINIMUM AND 25.00 HENRY MAXIMUM SINGLE COMPONENT SINGLE WINDING
WINDING QUANTITY 1 SINGLE COMPONENT
INDUCTANCE TYPE SWINGING
MOUNTING METHOD FLANGE AND UNTHREADED HOLE SINGLE GROUP
MOUNTING FACILITY QUANTITY 4 SINGLE GROUP
MOUNTING HOLE DIAMETER 0.313 INCHES NOMINAL SINGLE GROUP
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH 11.500 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH 5.000 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP
INCLOSURE TYPE FULLY INCLOSED
BODY LENGTH 10.500 INCHES NOMINAL
BODY HEIGHT 8.000 INCHES NOMINAL
BODY WIDTH 7.000 INCHES NOMINAL
RELIABILITY INDICATOR NOT ESTABLISHED
TEST DATA DOCUMENT 96253-2772 DRAWING
MANUFACTURERS CODE 96253
DESIGN CONTROL REFERENCE TTI2772

Restrictions/Controls & Freight Information | NSN 5950-00-511-8675

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Precious Metals Indicator Code:UPrecious metal type is unknown
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 063420 TRANSFORMERS,NOI,OR TRANSFORMER PAR
Less than car load rating P 77.5
Less than truck load rating W Rating Variable
Water commodity Code 595 unknown
Originating Activity Code 48 Federal Aviation Administration
Oklahoma City, OK 73125
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable