Product Details | CODE INDICATING WHEEL SWITCH

5930-01-407-8902 A switch which is externally actuated by a thumbwheel and/or pushbutton. A legend or message is visually displayed at each position of the indicating wheel which corresponds to electrically coded output. Electrically coded output is achieved by rotating a set of brush contacts permanently attached to the code indicating wheel, against a stationary commutator which is usually a printed wiring board having electrical pads or contacts which are interconnected by the rotating brush contacts. May have additional electrical components (such as resistors, capacitors, diodes) premounted on that portion of printed wiring board which extends beyond the back of switch housing.

Part Alternates: 63/013/S/07/S/B/0, 63013S07SB0, 5930-01-407-8902, 01-407-8902, 5930014078902, 014078902

Electrical and Electronic Equipment Components | Switches

Supply Group (FSG) NSN Assign. NIIN
59 07 FEB 1995 01-407-8902

Drawings & Photos | NSN 5930-01-407-8902


Cross Reference | NSN 5930-01-407-8902

Part Number Cage Code Manufacturer
63/013/S/07/S/B/0 07126 ELECTRO SWITCH CORP. DBA DIGITRAN

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5930-01-407-8902

Technical Data | NSN 5930-01-407-8902

Characteristic Specifications
STYLE DESIGNATOR 29 RECTANGULAR INDICATING
OVERALL LENGTH 0.410 INCHES MAXIMUM
OVERALL HEIGHT 1.640 INCHES NOMINAL
OVERALL WIDTH 1.700 INCHES NOMINAL
INDIVIDUAL SECTION QUANTITY 1
READOUT INDICATOR MARKING 1,2,4,8 SINGLE SECTION
ACTUATOR TYPE PUSH BUTTON SINGLE ACTUATOR
TERMINAL TYPE PRINTED CIRCUIT
MOUNTING METHOD THREADED HOLE SINGLE MOUNTING FACILITY
THREAD SERIES DESIGNATOR UNC SINGLE MOUNTING FACILITY
NOMINAL THREAD SIZE 0.086 INCHES SINGLE MOUNTING FACILITY
THREAD CLASS 2B SINGLE MOUNTING FACILITY
THREAD QUANTITY PER INCH 56 SINGLE MOUNTING FACILITY
MOUNTING FACILITY PATTERN TWO POSITION IN-LINE SINGLE MOUNTING FACILITY
DISTANCE BETWEEN MOUNTING FACILITY CENTERS 1.437 INCHES NOMINAL SINGLE MOUNTING FACILITY
SPECIAL FEATURES DWG BINARY CODED DECIMAL, ONE COMMON
III END ITEM IDENTIFICATION F155 AMT

Restrictions/Controls & Freight Information | NSN 5930-01-407-8902

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Electro-static Discharge Susceptible:ANo known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
No Freight Information