NSN 5915-01-281-7383 NF21585, F22040, 11461588
Product Details | RADIO FREQUENCY INTERFERENCE FILTER
5915-01-281-7383 An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes FILTER, LOW PASS and SUPPRESSOR, IGNITION INTERFERENCE. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see FILTER, BAND SUPPRESSION and FILTER, BAND PASS. See also LIMITER, ELECTRICAL NOISE.
Part Alternates: NF21585, F22040, 11461588, 5915-01-281-7383, 01-281-7383, 5915012817383, 012817383
Electrical and Electronic Equipment Components | Filters and Networks
Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
---|---|---|---|
59 | 30 JUN 1988 | 01-281-7383 | 00765 ( FILTER, RADIO FREQUENCY INTERFERENCE ) |
Demand History | NSN 5915-01-281-7383
Part Number | Request Date | QTY | Origin |
---|---|---|---|
5915-01-281-7383 | 2024-11-312 | 2 | US |
5915-01-281-7383 | 2024-11-312 | 10 | US |
5915-01-281-7383 | 2024-11-312 | 36 | US |
F22040 | 2024-06-169 | 119 | DIBBS |
F22040 | 2024-02-57 | 47 | DIBBS |
F22040 | 2024-02-46 | 47 | DIBBS |
F22040 | 2024-01-05 | 63 | DIBBS |
F22040 | 2023-11-316 | 21 | DIBBS |
F22040 | 2023-09-248 | 42 | DIBBS |
F22040 | 2023-08-235 | 42 | DIBBS |
F22040 | 2023-03-86 | 14 | DIBBS |
F22040 | 2023-01-31 | 13 | DIBBS |
F22040 | 2022-08-237 | 13 | DIBBS |
F22040 | 2022-03-87 | 20 | DIBBS |
F22040 | 2022-03-76 | 20 | DIBBS |
F22040 | 2020-10-300 | 65 | DIBBS |
F22040 | 2020-10-289 | 65 | DIBBS |
F22040 | 2020-09-247 | 11 | DIBBS |
F22040 | 2020-08-230 | 5 | DIBBS |
F22040 | 2020-08-215 | 5 | DIBBS |
F22040 | 2020-04-97 | 55 | DIBBS |
F22040 | 2020-03-84 | 55 | DIBBS |
F22040 | 2020-02-44 | 44 | DIBBS |
F22040 | 2019-10-287 | 24 | DIBBS |
F22040 | 2019-05-147 | 44 | DIBBS |
F22040 | 2019-02-49 | 20 | DIBBS |
5915-01-281-7383 | 2013-12-339 | 37 | DIBBS |
5915-01-281-7383 | 2013-11-305 | 72 | DIBBS |
5915-01-281-7383 | 2013-10-290 | 26 | DIBBS |
5915-01-281-7383 | 2013-10-290 | 44 | DIBBS |
5915-01-281-7383 | 2013-10-290 | 72 | DIBBS |
5915-01-281-7383 | 2013-10-275 | 26 | DIBBS |
5915-01-281-7383 | 2013-10-275 | 44 | DIBBS |
5915-01-281-7383 | 2013-03-79 | 66 | DIBBS |
5915-01-281-7383 | 2010-03-85 | 3 | DIBBS |
5915-01-281-7383 | 2010-03-85 | 5 | DIBBS |
5915-01-281-7383 | 2010-03-85 | 6 | DIBBS |
5915-01-281-7383 | 2010-03-85 | 8 | DIBBS |
5915-01-281-7383 | 2010-03-85 | 15 | DIBBS |
5915-01-281-7383 | 2010-03-85 | 16 | DIBBS |
5915-01-281-7383 | 2010-02-34 | 11 | DIBBS |
Request a Quote
What Our Customers Say
Compare
Related Products | NSN 5915-01-281-7383
Technical Data | NSN 5915-01-281-7383
Characteristic | Specifications |
---|---|
SOURCE IMPEDANCE RATING PER FUNCTION | 50.0 OHMS 1ST RADIO INTERFERENCE 50.0 OHMS 2ND RADIO INTERFERENCE 50.0 OHMS 3RD RADIO INTERFERENCE |
LOAD IMPEDANCE PER FUNCTION | 50.0 OHMS 1ST RADIO INTERFERENCE 50.0 OHMS 2ND RADIO INTERFERENCE 50.0 OHMS 3RD RADIO INTERFERENCE |
OPERATING VOLTAGE RATING AND TYPE PER FUNCTION | 208.0 VOLTS AC 1ST RADIO INTERFERENCE 208.0 VOLTS AC 2ND RADIO INTERFERENCE 208.0 VOLTS AC 3RD RADIO INTERFERENCE |
POWER LINE FREQUENCY RATING PER FUNCTION IN HERTZ | 400.0 1ST RADIO INTERFERENCE 400.0 2ND RADIO INTERFERENCE 400.0 3RD RADIO INTERFERENCE |
OPERATING CURRENT RATING PER FUNCTION IN AMPS | 80.0 1ST RADIO INTERFERENCE 80.0 2ND RADIO INTERFERENCE 80.0 3RD RADIO INTERFERENCE |
MAXIMUM VOLTAGE DROP PER FUNCTION | 2.08 VOLTS AC 1ST RADIO INTERFERENCE 2.08 VOLTS AC 2ND RADIO INTERFERENCE 2.08 VOLTS AC 3RD RADIO INTERFERENCE |
INCLOSURE TYPE | HERMETICALLY SEALED |
FUNCTIONAL TERMINAL TYPE AND QUANTITY | 3 THREADED STUD INPUT 1 CONNECTOR, RECEPTACLE OUTPUT |
STYLE DESIGNATOR | 12 RECTANGULAR TERMINAL/TERMINALS ON OPPOSITE SURFACES |
OVERALL LENGTH | 10.905 INCHES MAXIMUM |
OVERALL HEIGHT | 9.228 INCHES MINIMUM AND 9.408 INCHES MAXIMUM |
BODY LENGTH | 5.000 INCHES MAXIMUM |
BODY WIDTH | 3.000 INCHES MAXIMUM |
MOUNTING FACILITY TYPE AND QUANTITY | 2 THREADED HOLE 2 THREADED HOLE |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 2.985 INCHES MINIMUM AND 3.015 INCHES MAXIMUM |
MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNF |
III PRINCIPAL CIRCUITRY TYPE PER FUNCTION | INDUCTANCE-CAPACITANCE 1ST RADIO INTERFERENCE INDUCTANCE-CAPACITANCE 2ND RADIO INTERFERENCE INDUCTANCE-CAPACITANCE 3RD RADIO INTERFERENCE |
III AVERAGE LIFE RATING IN HOURS | 1000.0 |
III OUTPUT TERMINAL MANUFACTURER CODE | 96906 |
III OUTPUT TERMINAL IDENTIFICATION | MS3106R-28-22S |
III UNPACKAGED UNIT WEIGHT | 7.500 POUNDS |
III MAXIMUM DIELECTRIC WITHSTANDING DC VOLTAGE | 400.0 VOLTS AT SEA LEVEL |
III VIBRATION RESISTANCE RANGE IN HERTZ | 5.5 TO 500.0 |
III OPERATING TEMP RANGE | -45.6 TO 60.0 DEG CELSIUS |
Restrictions/Controls & Freight Information | NSN 5915-01-281-7383
Category | Code | Description |
---|---|---|
Shelf-Life Code: | 0 | Nondeteriorative |
Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
Demilitarization Code: | D | Munitions List Item or Commerce Control List Item. Demilitarization required. Total destruction of the item and components so as to preclude restoration or repair to a usable condition by melting, cutting, tearing, scratching, crushing, breaking, punching, neutralizing, etc. (As an alternate, burial or deep water dumping may be used when coordinated with the DoD Demilitarization Program Office.) |
Controlled Inventory Item Code: | 7 | NON-SENSITIVE (SRC-N/A) - UNCLASSIFIED AA&E: OR ITEMS ASSIGNED A DEMILITARIZATION CODE OTHER THAN A, B, Q, OR P FOR WHICH ANOTHER CIIC IS INAPPROPRIATE. (NOTE: THE LOSS, THEFT, UNLAWFUL DISPOSITION, AND/OR RECOVERY OF AN ITEM WITH CIIC 7 WILL BE INVESTIGATED IN ACCORDANCE WITH DOD-4000-25-2-M AND DOD 7200.14-R, VOLUME 12, CHAPTER 7). |
Precious Metals Indicator Code: | A | Item does not contain precious metal |
Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
Category | Code | Description |
---|---|---|
NMF Description | 061990 | ELECTRICAL EQUIP:FILTERS |
Less than car load rating | ||
Less than truck load rating | P | 77.5 |
Water commodity Code | 72D | unknown |
Originating Activity Code | TX | Defense Supply Center Columbus Columbus, OH 43218 |
Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
Air Commodity | H | Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc. |
Air Special Handling | Z | No special handling required. |
Special Handling Code | 9 | unknonwn |
HAZMAT | ||
Type of Cargo | Z | No special type of cargo code applicable |
Management | NSN 5915-01-281-7383
Category | Code | Description |
---|---|---|
Materiel Category and Inventory Manager | Q | Electronics Materiel (DLA/GSA Items) |
Appropriation and Budget Activity | 2 | Stock Fund Secondary Items |
Management Inventory Segment | 2 | NONREPARABLE ITEMS (Exclusive of Insurance and Provisioning Items). This code will be used to identify items which are not reparable. |
Specific Group/Generic Code | 0 | Medical Materiel |
Weapons Systems/End Item or Homogeneous Group | 00 | DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item |
Accounting Requirements Code | X | Expendable item. An item of Army property coded with an ARC of ?X? in the AMDF. Expendable items require no formal accountability after issue from a stock record account. Commercial and fabricated items similar to items coded ?X? in the AMDF are considered expendable items. |
Source of Supply | SMS | Defense Logistics Agency Enterprise Business Systems |
Agency | DA | Department of the Army |
Service Organization | A | U.S. Army |
Reparability | Z | This is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item. |
Acquisition Advice Codes | Z | INSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures. |
Controlled Item Code | 7 | NON-SENSITIVE (SRC-N/A) - UNCLASSIFIED AA&E: OR ITEMS ASSIGNED A DEMILITARIZATION CODE OTHER THAN A, B, Q, OR P FOR WHICH ANOTHER CIIC IS INAPPROPRIATE. (NOTE: THE LOSS, THEFT, UNLAWFUL DISPOSITION, AND/OR RECOVERY OF AN ITEM WITH CIIC 7 WILL BE INVESTIGATED IN ACCORDANCE WITH DOD-4000-25-2-M AND DOD 7200.14-R, VOLUME 12, CHAPTER 7). |
Shelf Life Code | 0 | Nondeteriorative |
Purchasing | QTY UOM |
1 EA : Each |