NSN 5915-01-119-6184 RF08225, RF8225, RF-8225
Product Details | RADIO FREQUENCY INTERFERENCE FILTER
5915-01-119-6184 An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes FILTER, LOW PASS and SUPPRESSOR, IGNITION INTERFERENCE. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see FILTER, BAND SUPPRESSION and FILTER, BAND PASS. See also LIMITER, ELECTRICAL NOISE.
Part Alternates: RF08225, RF8225, RF-8225, RS8225, RS-8225, 1150644, 1150-644, 5915-01-119-6184, 01-119-6184, 5915011196184, 011196184
Electrical and Electronic Equipment Components | Filters and Networks
Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
---|---|---|---|
59 | 27 SEP 1981 | 01-119-6184 | 00765 ( FILTER, RADIO FREQUENCY INTERFERENCE ) |
Request a Quote
What Our Customers Say
Compare
Related Products | NSN 5915-01-119-6184
Technical Data | NSN 5915-01-119-6184
Characteristic | Specifications |
---|---|
SOURCE IMPEDANCE RATING PER FUNCTION | 50.0 OHMS BLANK |
LOAD IMPEDANCE PER FUNCTION | 50.0 OHMS BLANK |
OPERATING VOLTAGE RATING AND TYPE PER FUNCTION | 50.0 VOLTS DC BLANK |
OPERATING CURRENT RATING PER FUNCTION IN AMPS | 15.0 BLANK |
INCLOSURE TYPE | ENCASED |
FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 TAB, SOLDER LUG INPUT 1 TAB, SOLDER LUG OUTPUT |
STYLE DESIGNATOR | 9 ROUND TERMINAL/TERMINALS ON OPPOSITE SURFACES |
OVERALL LENGTH | 1.110 INCHES MAXIMUM |
BODY LENGTH | 0.522 INCHES MAXIMUM |
BODY OUTSIDE DIAMETER | 0.375 INCHES NOMINAL |
MOUNTING FACILITY TYPE AND QUANTITY | 1 THREADED BUSHING |
MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UN |
NOMINAL THREAD SIZE | 0.250 INCHES |
III PRINCIPAL CIRCUITRY TYPE PER FUNCTION | CAPACITANCE-INDUCTANCE BLANK |
III MAXIMUM TEMP RISE | 25.0 DEG CELSIUS |
III MAXIMUM DIELECTRIC WITHSTANDING DC VOLTAGE | 100.0 VOLTS AT SEA LEVEL |
III VIBRATION RESISTANCE RANGE IN HERTZ | 5.0 TO 500.0 |
III OPERATING TEMP RANGE | -55.0 TO 125.0 DEG CELSIUS |
III BODY MATERIAL | METAL |
Restrictions/Controls & Freight Information | NSN 5915-01-119-6184
Category | Code | Description |
---|---|---|
Shelf-Life Code: | 0 | Nondeteriorative |
Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
Controlled Inventory Item Code: | U | UNCLASSIFIED |
Precious Metals Indicator Code: | A | Item does not contain precious metal |
Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
Category | Code | Description |
---|---|---|
NMF Description | 061990 | ELECTRICAL EQUIP:FILTERS |
Less than car load rating | ||
Less than truck load rating | P | 77.5 |
Water commodity Code | 72D | unknown |
Originating Activity Code | TX | Defense Supply Center Columbus Columbus, OH 43218 |
Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
Air Commodity | H | Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc. |
Air Special Handling | Z | No special handling required. |
Special Handling Code | 9 | unknonwn |
HAZMAT | ||
Type of Cargo | Z | No special type of cargo code applicable |