Product Details | RADIO FREQUENCY INTERFERENCE FILTER

5915-00-499-6325 An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes FILTER, LOW PASS and SUPPRESSOR, IGNITION INTERFERENCE. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see FILTER, BAND SUPPRESSION and FILTER, BAND PASS. See also LIMITER, ELECTRICAL NOISE.

Part Alternates: RF03854, RF3854, 68420003301, 5915-00-499-6325, 00-499-6325, 5915004996325, 004996325

Electrical and Electronic Equipment Components | Filters and Networks

Supply Group (FSG) NSN Assign. NIIN
59 02 JUL 1971 00-499-6325

Drawings & Photos | NSN 5915-00-499-6325


Demand History | NSN 5915-00-499-6325

Part Number Request Date QTY Origin
68420003301 2022-03-90 2 DIBBS
RF03854 2022-03-90 2 DIBBS
68420003301 2022-01-30 1 DIBBS
RF03854 2022-01-30 1 DIBBS
68420003301 2021-03-87 1 DIBBS
RF03854 2021-03-87 1 DIBBS
5915-00-499-6325 2018-07-211 5 DIBBS
5915-00-499-6325 2018-07-200 5 DIBBS
5915-00-499-6325 2018-01-29 4 DIBBS
5915-00-499-6325 2018-01-18 4 DIBBS
5915-00-499-6325 2016-05-143 4 DIBBS
5915-00-499-6325 2014-09-271 4 DIBBS
5915-00-499-6325 2013-04-105 4 DIBBS
5915-00-499-6325 2012-11-325 1 DIBBS
5915-00-499-6325 2012-08-244 1 DIBBS
5915-00-499-6325 2012-05-142 1 DIBBS
5915-00-499-6325 2011-06-165 4 DIBBS
5915-00-499-6325 2010-08-239 1 DIBBS
5915-00-499-6325 2010-01-13 4 DIBBS
5915-00-499-6325 2007-05-129 6 DIBBS
5915-00-499-6325 2007-04-102 2 DIBBS
5915-00-499-6325 2007-02-47 5 DIBBS

Cross Reference | NSN 5915-00-499-6325

Part Number Cage Code Manufacturer
68420003301 89944 KOLLSMAN, INC.
RF03854 13619 EMS DEVELOPMENT CORPORATION
RF3854 13619 EMS DEVELOPMENT CORPORATION

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5915-00-499-6325

Technical Data | NSN 5915-00-499-6325

Characteristic Specifications
SOURCE IMPEDANCE RATING PER FUNCTION 50.0 OHMS 1ST RADIO INTERFERENCE 50.0 OHMS 2ND RADIO INTERFERENCE
LOAD IMPEDANCE PER FUNCTION 50.0 OHMS 1ST RADIO INTERFERENCE 50.0 OHMS 2ND RADIO INTERFERENCE
OPERATING VOLTAGE RATING AND TYPE PER FUNCTION 400.0 VOLTS AC BLANK AND 3.0 VOLTS DC BLANK
POWER LINE FREQUENCY RATING PER FUNCTION IN HERTZ 400.0 1ST RADIO INTERFERENCE 400.0 2ND RADIO INTERFERENCE
OPERATING CURRENT RATING PER FUNCTION IN AMPS 3.0 1ST RADIO INTERFERENCE 3.0 2ND RADIO INTERFERENCE
MAXIMUM VOLTAGE DROP PER FUNCTION 0.75 MILLIVOLTS DC 1ST RADIO INTERFERENCE 0.75 MILLIVOLTS DC 2ND RADIO INTERFERENCE
INCLOSURE TYPE ENCASED
FUNCTIONAL TERMINAL TYPE AND QUANTITY 1 CONNECTOR, RECEPTACLE INPUT 2 THREADED STUD OUTPUT 2 TAB, SOLDER LUG GROUND
STYLE DESIGNATOR 2 RECTANGULAR TERMINAL/TERMINALS ON ONE SURFACE
OVERALL HEIGHT 5.000 INCHES NOMINAL
BODY LENGTH 2.000 INCHES NOMINAL
BODY HEIGHT 3.750 INCHES NOMINAL
BODY WIDTH 1.000 INCHES NOMINAL
MOUNTING FACILITY TYPE AND QUANTITY 1 THREADED HOLE
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH 1.500 INCHES NOMINAL
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH 0.500 INCHES NOMINAL
MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR UNC
NOMINAL THREAD SIZE 0.164 INCHES
III PRINCIPAL CIRCUITRY TYPE PER FUNCTION INDUCTANCE-CAPACITANCE 1ST RADIO INTERFERENCE INDUCTANCE-CAPACITANCE 2ND RADIO INTERFERENCE
III INPUT TERMINAL MANUFACTURER CODE 96906
III INPUT TERMINAL IDENTIFICATION MS27034H10B5PN
III VIBRATION RESISTANCE RANGE IN HERTZ 10.0 TO 55.0
III OPERATING TEMP RANGE -55.0 TO 125.0 DEG CELSIUS

Restrictions/Controls & Freight Information | NSN 5915-00-499-6325

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:BMunitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.)
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:UPrecious metal type is unknown
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 061990 ELECTRICAL EQUIP:FILTERS
Less than car load rating
Less than truck load rating P 77.5
Water commodity Code 72D unknown
Originating Activity Code TX Defense Supply Center Columbus
Columbus, OH 43218
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5915-00-499-6325

Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Materiel Management Aggregation CodeEHSX:ELECTRONIC COMPONENTS
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each