NSN 5915-00-424-9600 A25A309042101, A25A309-042-101, 2JX51A6
Product Details | RADIO FREQUENCY INTERFERENCE FILTER
5915-00-424-9600 An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes FILTER, LOW PASS and SUPPRESSOR, IGNITION INTERFERENCE. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see FILTER, BAND SUPPRESSION and FILTER, BAND PASS. See also LIMITER, ELECTRICAL NOISE.
Part Alternates: A25A309042101, A25A309-042-101, 2JX51A6, 5915-00-424-9600, 00-424-9600, 5915004249600, 004249600
Electrical and Electronic Equipment Components | Filters and Networks
Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
---|---|---|---|
59 | 09 APR 1971 | 00-424-9600 | 00765 ( FILTER, RADIO FREQUENCY INTERFERENCE ) |
Request a Quote
What Our Customers Say
Compare
Related Products | NSN 5915-00-424-9600
Technical Data | NSN 5915-00-424-9600
Characteristic | Specifications |
---|---|
OPERATING CURRENT RATING PER FUNCTION IN AMPS | 1.5 BLANK |
MAXIMUM VOLTAGE DROP PER FUNCTION | 0.11 VOLTS AC BLANK AND 0.11 VOLTS DC BLANK |
INCLOSURE TYPE | ENCASED |
OVERALL LENGTH | 2.630 INCHES NOMINAL |
BODY LENGTH | 2.060 INCHES NOMINAL |
BODY OUTSIDE DIAMETER | 0.670 INCHES NOMINAL |
MOUNTING FACILITY TYPE AND QUANTITY | 1 THREADED BUSHING |
MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNF |
NOMINAL THREAD SIZE | 0.250 INCHES |
III AVERAGE LIFE RATING IN HOURS | 10000.0 |
III VIBRATION RESISTANCE RANGE IN HERTZ | 5.0 TO 500.0 |
III OPERATING TEMP RANGE | -54.0 TO 100.0 DEG CELSIUS |
MANUFACTURERS CODE | 56289 |
DESIGN CONTROL REFERENCE | 2JX51A6 |
Restrictions/Controls & Freight Information | NSN 5915-00-424-9600
Category | Code | Description |
---|---|---|
Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
Demilitarization Code: | B | Munitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.) |
Precious Metals Indicator Code: | A | Item does not contain precious metal |
Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
Automatic Data Processing Equipment: | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9) |
Category | Code | Description |
---|---|---|
NMF Description | 069100 | FILTERS:FILTERS,NOI SUB6 |
Less than car load rating | J | 100.2 |
Less than truck load rating | J | 100.2 |
Water commodity Code | 72D | unknown |
Originating Activity Code | ZG | Germany ZH ZJ |
Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
Air Commodity | H | Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc. |
Air Special Handling | Z | No special handling required. |
Special Handling Code | Z | unknonwn |
HAZMAT | ||
Type of Cargo | Z | No special type of cargo code applicable |