Product Details | PAPER-PLASTIC DIELECTRI METALLIZED FIXED CAPACITOR

5910-01-298-1985 A capacitor whose capacitance value cannot be adjusted or varied having paper, plastic, or any combination of paper and plastic as the dielectric material with a metallic film deposited thereon. It may be a single unit or consist of two or more units which cannot be separated.

Part Alternates: 5910-01-298-1985, 01-298-1985, 5910012981985, 012981985

Electrical and Electronic Equipment Components | Capacitors

Supply Group (FSG) NSN Assign. NIIN
59 01-298-1985

Drawings & Photos | NSN 5910-01-298-1985


Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5910-01-298-1985

Technical Data | NSN 5910-01-298-1985

Characteristic Specifications
CAPACITANCE VALUE PER SECTION 1.000 MICROFARADS SINGLE SECTION
TOLERANCE RANGE PER SECTION -10.00 TO 10.00 PERCENT SINGLE SECTION
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION 150.0 AC-RMS SINGLE SECTION
NONDERATED OPERATING TEMP -55.0 DEG CELSIUS MINIMUM AND 105.0 DEG CELSIUS MAXIMUM
BODY STYLE 26B W/O MTG FACILITIES, AXIAL TERMINALS
BODY DIAMETER 0.557 INCHES MINIMUM AND 0.577 INCHES MAXIMUM
BODY LENGTH 0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM
SCHEMATIC DIAGRAM DESIGNATOR 3C ELECTRODE(S) GROUNDED TO CASE, W/GND TERMINAL
TERMINAL TYPE AND QUANTITY 2 UNINSULATED WIRE LEAD
TERMINAL LENGTH 1.625 INCHES MINIMUM AND 1.725 INCHES MAXIMUM
TERMINAL DIAMETER 0.032 INCHES NOMINAL
CASE MATERIAL METAL
CASE INSULATION MATERIAL PLASTIC
INSULATION RESISTANCE AT REFERENCE TEMP 25000.0 MEGOHM-MICROFARADS
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT 0.180
RELIABILITY INDICATOR NOT ESTABLISHED
FEATURES PROVIDED HERMETICALLY SEALED CASE
III TERMINAL SURFACE TREATMENT SOLDER
III END ITEM IDENTIFICATION 4935-00-930-7250 TEST STATION,GU
(NON-CORE DATA) OVERALL LENGTH 1.351 INCHES MAXIMUM
(NON-CORE DATA) OVERALL HEIGHT 0.585 INCHES MAXIMUM
(NON-CORE DATA) OVERALL WIDTH 0.585 INCHES MAXIMUM

Restrictions/Controls & Freight Information | NSN 5910-01-298-1985

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Category Code Description
No Freight Information