Product Details | PAPER-PLASTIC DIELECTRI METALLIZED FIXED CAPACITOR

5910-01-297-6781 A capacitor whose capacitance value cannot be adjusted or varied having paper, plastic, or any combination of paper and plastic as the dielectric material with a metallic film deposited thereon. It may be a single unit or consist of two or more units which cannot be separated.

Part Alternates: N186ZR12A, N186ZR-12A, N186ZR135VAC2.0UFPOR, N186ZR135VAC2.0UFPORM10PCT, N186ZR135VAC20UFPOR, N186ZR135VAC20UFPORM10PCT, 5910-01-297-6781, 01-297-6781, 5910012976781, 012976781

Electrical and Electronic Equipment Components | Capacitors

Supply Group (FSG) NSN Assign. NIIN
59 05 APR 1989 01-297-6781

Drawings & Photos | NSN 5910-01-297-6781


Cross Reference | NSN 5910-01-297-6781

Part Number Cage Code Manufacturer
N186ZR-12A 70106 ACUSHNET RUBBER COMPANY, INC. DBA PRECIX
N186ZR-12A 81133 NWL TRANSFORMERS NWL CAPACITORS DIV
N186ZR135VAC2.0UFPOR 70106 ACUSHNET RUBBER COMPANY, INC. DBA PRECIX
N186ZR135VAC2.0UFPORM10PCT 81133 NWL TRANSFORMERS NWL CAPACITORS DIV

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5910-01-297-6781

Technical Data | NSN 5910-01-297-6781

Characteristic Specifications
CAPACITANCE VALUE PER SECTION 2.000 MICROFARADS SINGLE SECTION
TOLERANCE RANGE PER SECTION -10.00 TO 10.00 PERCENT SINGLE SECTION
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION 135.0 AC-RMS SINGLE SECTION
NONDERATED OPERATING TEMP -55.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM
BODY STYLE 26B W/O MTG FACILITIES, AXIAL TERMINALS
BODY DIAMETER 0.625 INCHES MAXIMUM
BODY LENGTH 1.687 INCHES MAXIMUM
SCHEMATIC DIAGRAM DESIGNATOR 1C NO COMMON OR GROUNDED ELECTRODE(S)
TERMINAL TYPE AND QUANTITY 2 UNINSULATED WIRE LEAD
TERMINAL LENGTH 2.000 INCHES MINIMUM
TERMINAL DIAMETER 0.032 INCHES NOMINAL
CASE MATERIAL PLASTIC
INSULATION RESISTANCE AT REFERENCE TEMP 100000.0 MEGOHMS
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT 0.100
RELIABILITY INDICATOR NOT ESTABLISHED
III TERMINAL SURFACE TREATMENT SOLDER
III DIELECTRIC MATERIAL PLASTIC POLYETHYLENE
(NON-CORE DATA) OVERALL LENGTH 1.687 INCHES MAXIMUM
III INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP 20000.0 MEGOHMS
(NON-CORE DATA) OVERALL HEIGHT 0.625 INCHES MAXIMUM
(NON-CORE DATA) OVERALL WIDTH 0.625 INCHES MAXIMUM

Restrictions/Controls & Freight Information | NSN 5910-01-297-6781

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 061400 CONDENSERS/PARTS NOI/CAPACITORS
Less than car load rating
Less than truck load rating P 77.5
Water commodity Code 72D unknown
Originating Activity Code TX Defense Supply Center Columbus
Columbus, OH 43218
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5910-01-297-6781

Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each