Product Details | PAPER-PLASTIC DIELECTRI METALLIZED FIXED CAPACITOR

5910-01-297-3122 A capacitor whose capacitance value cannot be adjusted or varied having paper, plastic, or any combination of paper and plastic as the dielectric material with a metallic film deposited thereon. It may be a single unit or consist of two or more units which cannot be separated.

Part Alternates: MKS2-.082UF50VPORM10PCT, MKS2082UF50VPORM10PCT, 714717, 5910-01-297-3122, 01-297-3122, 5910012973122, 012973122

Electrical and Electronic Equipment Components | Capacitors

Supply Group (FSG) NSN Assign. NIIN
59 01 APR 1989 01-297-3122

Drawings & Photos | NSN 5910-01-297-3122


Cross Reference | NSN 5910-01-297-3122

Part Number Cage Code Manufacturer
714717 89536 FLUKE CORPORATION
MKS2-.082UF50VPORM10PCT 16236 DLA LAND AND MARITIME
MKS2-.082UF50VPORM10PCT D9816 WIMA SPEZIALVERTRIEB ELEKTRONISCHERBAUELEMENTE GMBH & CO.

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5910-01-297-3122

Technical Data | NSN 5910-01-297-3122

Characteristic Specifications
CAPACITANCE VALUE PER SECTION 0.082 MICROFARADS SINGLE SECTION
TOLERANCE RANGE PER SECTION -10.00 TO 10.00 PERCENT SINGLE SECTION
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION 50.0 DC SINGLE SECTION
NONDERATED OPERATING TEMP -40.0 DEG CELSIUS MINIMUM AND 100.0 DEG CELSIUS MAXIMUM
BODY STYLE 27A W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
BODY LENGTH 7.2 MILLIMETERS MAXIMUM
BODY WIDTH 6.5 MILLIMETERS MAXIMUM
BODY HEIGHT 2.7 MILLIMETERS MAXIMUM
SCHEMATIC DIAGRAM DESIGNATOR 1C NO COMMON OR GROUNDED ELECTRODE(S)
TERMINAL TYPE AND QUANTITY 2 PRINTED CIRCUIT
TERMINAL LENGTH 6.0 MILLIMETERS NOMINAL
TERMINAL DIAMETER 0.5 MILLIMETERS MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH 5.0 MILLIMETERS MAXIMUM
CASE MATERIAL PLASTIC
INSULATION RESISTANCE AT REFERENCE TEMP 100000.0 MEGOHMS
RELIABILITY INDICATOR NOT ESTABLISHED
III TERMINAL SURFACE TREATMENT SOLDER
III DIELECTRIC MATERIAL PLASTIC POLYETHYLENE TEREPHTHALATE
(NON-CORE DATA) OVERALL LENGTH 7.2 MILLIMETERS MAXIMUM
(NON-CORE DATA) OVERALL HEIGHT 2.7 MILLIMETERS MAXIMUM
(NON-CORE DATA) OVERALL WIDTH 6.5 MILLIMETERS MAXIMUM

Restrictions/Controls & Freight Information | NSN 5910-01-297-3122

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 061400 CONDENSERS/PARTS NOI/CAPACITORS
Less than car load rating
Less than truck load rating P 77.5
Water commodity Code 72D unknown
Originating Activity Code TX Defense Supply Center Columbus
Columbus, OH 43218
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5910-01-297-3122

Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each