Product Details | PAPER-PLASTIC DIELECTRI METALLIZED FIXED CAPACITOR

5910-01-032-9762 A capacitor whose capacitance value cannot be adjusted or varied having paper, plastic, or any combination of paper and plastic as the dielectric material with a metallic film deposited thereon. It may be a single unit or consist of two or more units which cannot be separated.

Part Alternates: 5910-01-032-9762, 01-032-9762, 5910010329762, 010329762

Electrical and Electronic Equipment Components | Capacitors

Supply Group (FSG) NSN Assign. NIIN
59 01-032-9762

Drawings & Photos | NSN 5910-01-032-9762


Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5910-01-032-9762

Technical Data | NSN 5910-01-032-9762

Characteristic Specifications
CAPACITANCE VALUE PER SECTION 0.560 MICROFARADS SINGLE SECTION
TOLERANCE RANGE PER SECTION -1.00 TO 1.00 PERCENT SINGLE SECTION
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION 30.0 DC SINGLE SECTION
NONDERATED OPERATING TEMP -65.0 DEG CELSIUS MINIMUM AND 100.0 DEG CELSIUS MAXIMUM
BODY STYLE 26B W/O MTG FACILITIES, AXIAL TERMINALS
BODY DIAMETER 0.342 INCHES MAXIMUM
BODY LENGTH 0.687 INCHES NOMINAL
SCHEMATIC DIAGRAM DESIGNATOR 1C NO COMMON OR GROUNDED ELECTRODE(S)
TERMINAL TYPE AND QUANTITY 2 UNINSULATED WIRE LEAD
TERMINAL LENGTH 1.625 INCHES MINIMUM
TERMINAL DIAMETER 0.025 INCHES NOMINAL
CASE MATERIAL METAL
CASE INSULATION MATERIAL PLASTIC
INSULATION RESISTANCE AT REFERENCE TEMP 550000.0 MEGOHMS
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT 0.1500
RELIABILITY INDICATOR ESTABLISHED
RELIABILITY FAILURE RATE LEVEL IN PERCENT 0.1000
FEATURES PROVIDED HERMETICALLY SEALED CASE
TEST DATA DOCUMENT 81349-MIL-C-83421 SPECIFICATION
SPECIFICATION/STANDARD DATA 81349-MIL-C-83421/1 GOVERNMENT SPECIFICATION
III TERMINAL SURFACE TREATMENT SOLDER
(NON-CORE DATA) OVERALL LENGTH 0.887 INCHES MAXIMUM
III INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP 55000.0 MEGOHMS
(NON-CORE DATA) OVERALL HEIGHT 0.342 INCHES MAXIMUM
(NON-CORE DATA) OVERALL WIDTH 0.342 INCHES MAXIMUM
MANUFACTURERS CODE 81349
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE MILC83421-1
MANUFACTURERS CODE 81349
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE M83421-01-1231P

Restrictions/Controls & Freight Information | NSN 5910-01-032-9762

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Category Code Description
No Freight Information