Product Details | NONPRECISION NONWIRE WOUND VARIABLE RESISTOR

5905-00-873-1056 A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.

Part Alternates: MILR943, MILR94-3, PC300SF/3P1544, PC300SF3P1544, RV6NAYSD203A, W/7796, W7796, WA2G056S203UA, 0080679003, 008-067-9-003, 311-1155-00, 382/CM40035, 382CM40035, 5905-00-873-1056, 00-873-1056, 5905008731056, 311115500, 008731056

Electrical and Electronic Equipment Components | Resistors

Supply Group (FSG) NSN Assign. NIIN
59 29 APR 1972 00-873-1056

Drawings & Photos | NSN 5905-00-873-1056


Demand History | NSN 5905-00-873-1056

Part Number Request Date QTY Origin
MILR943 2010-03-74 5 United States

Cross Reference | NSN 5905-00-873-1056

Part Number Cage Code Manufacturer
008-067-9-003 30678 B AND K PRODUCTS CO INC
311-1155-00 80009 TEKTRONIX, INC. DBA TEKTRONIX
382/CM40035 12697 CLAROSTAT SENSORS AND CONTROLS
MILR94-3 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
PC300SF/3P1544 11237 CTS CORP OF CALIFORNIA DBA CTS ELECTRONICS CORP PASO ROBLES DIV
RV6NAYSD203A 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
W/7796 01121 ROCKWELL AUTOMATION, INC.
WA2G056S203UA 01121 ROCKWELL AUTOMATION, INC.

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5905-00-873-1056

Technical Data | NSN 5905-00-873-1056

Characteristic Specifications
SECTION QUANTITY 1
ELECTRICAL RESISTANCE PER SECTION 20.0 KILOHMS SINGLE SECTION
RESISTANCE TOLERANCE PER SECTION IN PERCENT -10.0 TO 10.0 SINGLE SECTION
STANDARD TAPER CURVE PER SECTION A SINGLE SECTION
MAXIMUM STOP TORQUE 48.00 INCH-OUNCES
MAXIMUM STARTING TORQUE 6.00 INCH-OUNCES
MAXIMUM RUNNING TORQUE 0.50 INCH-OUNCES
RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT -3.0 TO 0.0 -55 DEG CELSIUS SINGLE SECTION AND -5.0 TO 10.0 -25 DEG CELSIUS SINGLE SECTION AND -5.0 TO 10.0 25 DEG CELSIUS SINGLE SECTION AND -0.0 TO 3.0 120 DEG CELSIUS SINGLE SECTION
POWER DISSIPATION RATING PER SECTION IN WATTS 0.5 FREE AIR SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER 70.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER 120.0 SINGLE SECTION
BODY STYLE 1B CYLINDRICAL BUSHING MOUNTED
BODY DIAMETER 0.500 INCHES NOMINAL
BODY LENGTH 0.453 INCHES NOMINAL
MOUNTING BUSHING LENGTH 0.250 INCHES NOMINAL
ACTUATOR TYPE SINGLE SHAFT
SHAFT STYLE 3C ROUND, SLOTTED
SHAFT DIAMETER 0.125 INCHES NOMINAL
SHAFT LENGTH 0.875 INCHES NOMINAL
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG 292.0 MINIMUM AND 298.0 MAXIMUM
ACTUATOR TRAVEL CONTROL FEATURE STOPS
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION 292.0 MINIMUM AND 298.0 MAXIMUM
NONTURN DEVICE LOCATION AT 5:00 OCLOCK AND AT 11:00 OCLOCK
NONTURN DEVICE RADIUS 0.245 INCHES NOMINAL
MOUNTING METHOD STANDARD BUSHING
SCREW THREAD SERIES DESIGNATOR UNEF
SCREW THREAD DIAMETER 0.250 INCHES NOMINAL
SCREW THREAD QUANTITY PER INCH 32.0
TERMINAL TYPE AND QUANTITY 3 TAB, SOLDER LUG
TERMINAL LOCATION REAR END
RELIABILITY INDICATOR NOT ESTABLISHED
TEST DATA DOCUMENT 81349-MIL-R-94 SPECIFICATION
SPECIFICATION/STANDARD DATA 81349-MIL-R-94/3 GOVERNMENT SPECIFICATION
III OVERALL LENGTH 1.594 INCHES MAXIMUM
III OVERALL DIAMETER 0.500 INCHES NOMINAL
MANUFACTURERS CODE 81349
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE MILR94-3
MANUFACTURERS CODE 81349
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE RV6NAYSD203A

Restrictions/Controls & Freight Information | NSN 5905-00-873-1056

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Electro-static Discharge Susceptible:BESD sensitivity
Precious Metals Indicator Code:UPrecious metal type is unknown
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 062960 REOSTATS/PARTS NOI
Less than car load rating
Less than truck load rating P 77.5
Water commodity Code 72D unknown
Originating Activity Code TX Defense Supply Center Columbus
Columbus, OH 43218
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo 3 Electrostatic Sensitive Device (ESD), subject to damage caused by electrostatic discharge. (See DoD 4500.32-R, Volume 1, Appendix A, Section I for additional information on ESD devices).

Management | NSN 5905-00-873-1056

Category Code Description
Materiel Category and Inventory ManagerQ Electronics Materiel (DLA/GSA Items)
Appropriation and Budget Activity2 Stock Fund Secondary Items
Management Inventory Segment2 NONREPARABLE ITEMS (Exclusive of Insurance and Provisioning Items). This code will be used to identify items which are not reparable.
Specific Group/Generic Code0 Medical Materiel
Weapons Systems/End Item or Homogeneous Group00DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
Accounting Requirements CodeX Expendable item. An item of Army property coded with an ARC of ?X? in the AMDF. Expendable items require no formal accountability after issue from a stock record account. Commercial and fabricated items similar to items coded ?X? in the AMDF are considered expendable items.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDADepartment of the Army
Service OrganizationAU.S. Army
ReparabilityZThis is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item.
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Materiel Management Aggregation CodeEHSX:ELECTRONIC COMPONENTS
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Price ValidationV The current standard price has been validated.
  • The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
  • The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
  • ZOP or Standard price challenges are permissible but must be supported by adequate justification.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each