NSN 5340-01-476-2316 3C11248101, 3C11248-101, 01-476-2316
Product Details | SPACING THREADED STANDOFF
5340-01-476-2316 A standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
Part Alternates: 3C11248101, 3C11248-101, 5340-01-476-2316, 01-476-2316, 5340014762316, 014762316
Hardware and Abrasives | Hardware, Commercial
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | 30 JUN 2000 | 01-476-2316 | 40280 ( STANDOFF, THREADED, SPACING ) |
Cross Reference | NSN 5340-01-476-2316
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 3C11248-101 | 98897 | LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN AERONAUTICS |
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 5340-01-476-2316
Technical Data | NSN 5340-01-476-2316
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL COMP 4130 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| CROSS-SECTIONAL SHAPE | ROUND |
| DIAMETER | 0.920 INCHES MINIMUM AND 0.940 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNF RIGHT INTERNAL UNF LEFT EXTERNAL |
| NOMINAL THREAD SIZE | 0.750 INCHES RIGHT INTERNAL 0.750 INCHES LEFT EXTERNAL |
| THREAD QUANTITY PER INCH | 16 RIGHT INTERNAL 16 LEFT EXTERNAL |
| THREAD CLASS | 3B RIGHT INTERNAL 3A LEFT EXTERNAL |
| THREAD DIRECTION | RIGHT-HAND RIGHT INTERNAL LEFT-HAND LEFT EXTERNAL |
| THREAD LENGTH | 1.520 INCHES NOMINAL RIGHT INTERNAL 1.800 INCHES NOMINAL LEFT EXTERNAL |
| SPECIAL FEATURES | HEAT TREAT 180,000-200,000 PSI TENSIL STRENGTH PER LAC 0522; MANUFACTURER'S DRAWING NAME FITTING - ROD, INPUT IDLER ELEVATOR; GROOVED IN TWO PLACES PER DS2278-12 |
| III END ITEM IDENTIFICATION | C-141 ELEVATOR CONTROL SYS |
Restrictions/Controls & Freight Information | NSN 5340-01-476-2316
| Category | Code | Description |
|---|---|---|
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Demilitarization Code: | B | Munitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.) |
| Precious Metals Indicator Code: | A | Item does not contain precious metal |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Automatic Data Processing Equipment: | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9) |
| Category | Code | Description |
|---|---|---|
| No Freight Information | ||