Product Details | ROD END CLEVIS

5340-00-906-2194 A forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.20210050018Guns, through 30mm53400020Hardware, Commercial

Part Alternates: S6126501041, S6126-50104-1, 5340-00-906-2194, 00-906-2194, 5340009062194, 009062194

Hardware and Abrasives | Hardware, Commercial

Supply Group (FSG) NSN Assign. NIIN
53 01 JAN 1960 00-906-2194

Drawings & Photos | NSN 5340-00-906-2194


Cross Reference | NSN 5340-00-906-2194

Part Number Cage Code Manufacturer
S6126-50104-1 78286 SIKORSKY AIRCRAFT CORPORATION

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5340-00-906-2194

Technical Data | NSN 5340-00-906-2194

Characteristic Specifications
MATERIAL ALUMINUM ALLOY 7075 BODY
MATERIAL DOCUMENT AND CLASSIFICATION QQ-A-225/9 FED SPEC SINGLE MATERIAL RESPONSE BODY
SURFACE TREATMENT ANODIZE BODY
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE BODY
STYLE DESIGNATOR 31 CLEVIS
END RADIUS 1.125 INCHES NOMINAL
OVERALL DIAMETER 3.181 INCHES MINIMUM AND 3.183 INCHES MAXIMUM
FORK SPAN WIDTH 0.895 INCHES MINIMUM AND 0.896 INCHES MAXIMUM
DISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END 8.120 INCHES NOMINAL
FORK ARM THICKNESS 0.300 INCHES NOMINAL
FORK DEPTH 1.500 INCHES NOMINAL
ROD CONNECTION BORE DIAMETER 2.875 INCHES NOMINAL
ROD CONNECTION BORE DEPTH 4.120 INCHES NOMINAL
HOLE DIAMETER 0.749 INCHES MINIMUM AND 0.750 INCHES MAXIMUM

Restrictions/Controls & Freight Information | NSN 5340-00-906-2194

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:UPrecious metal type is unknown
Criticality Code:FThe item is an Aviation Critical Safety Item/Flight Safety Critical Aircraft Part ((ACSI/FSCAP).
Category Code Description
NMF Description 094140 CLEVISES IRON/STEEL
Less than car load rating
Less than truck load rating U 50.0
Water commodity Code 713 unknown
Originating Activity Code XX
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity 2 Arms/Weapons (all types including Inert Component Parts). When a 2 is indicated in the first position, then the special handling code must be determined from table 85 , part 1.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5340-00-906-2194

Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesJNOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each