NSN 5305-01-576-3781 NAS17904R3, NAS1790-4R3, 01-576-3781
Product Details | CLOSE TOLERANCE SCREW
5305-01-576-3781 A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Part Alternates: NAS17904R3, NAS1790-4R3, 5305-01-576-3781, 01-576-3781, 5305015763781, 015763781
Hardware and Abrasives | Screws
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | 29 JUL 2009 | 01-576-3781 | 29294 ( SCREW, CLOSE TOLERANCE ) |
Demand History | NSN 5305-01-576-3781
| Part Number | Request Date | QTY | Origin |
|---|---|---|---|
| NAS17904R3 | 2006-08-220 | 20 | Vietnam |
Cross Reference | NSN 5305-01-576-3781
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| NAS1790-4R3 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES |
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 5305-01-576-3781
Technical Data | NSN 5305-01-576-3781
| Characteristic | Specifications |
|---|---|
| THREAD DIRECTION | RIGHT-HAND |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, 100 DEGREE FLUSH HEAD, 160,000 PSI UTS |
| HEAD STYLE | FLAT COUNTERSUNK |
| INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| HEAD DIAMETER | 0.464 INCHES MINIMUM AND 0.506 INCHES MAXIMUM |
| MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| SURFACE TREATMENT | CADMIUM OVERALL |
| GRIP LENGTH | 0.188 NOMINAL INCHES |
| THREAD QUANTITY PER INCH | 28 |
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| END ITEM IDENTIFICATION | NIMROD MRA4; NIMROD 2000; AIR RECONNAISSANCE |
| FASTENER LENGTH | 0.613 INCHES NOMINAL |
| THREAD LENGTH | 0.425 INCHES NOMINAL |
| THREAD SERIES DESIGNATOR | UNJF |
| MATERIAL | STEEL COMP 4140 OVERALL OR STEEL COMP 4340 OVERALL OR STEEL COMP 8740 OVERALL |
| GRIP DIAMETER | 0.189 NOMINAL INCHES |
| NOMINAL THREAD DIAMETER | 0.250 INCHES |
| THREAD CLASS | 3A |
Restrictions/Controls & Freight Information | NSN 5305-01-576-3781
| Category | Code | Description |
|---|---|---|
| Hazardous Material Indicator Code | N | There is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials |
| Demilitarization Code: | Q | Strategic List Item (SLI). Demilitarization not required. SLI are non-MLI(Munitions List Items) controlled by the U.S. Dept. of Commerce through the Export Administration Regulations (EAR) and indicated on the Commerce Control List (CCL). Each CCL entry is preceded by a four-digit Export Control Commerce Control List Item (CCLI) – MUT to the point of scrap required outside the United States. Inside the United States, MUT is required when the DEMIL integrity code (IC) is “3” and MUT is not required when the DEMIL IC is “6.” |
| Electro-static Discharge Susceptible: | A | No known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity |
| Precious Metals Indicator Code: | A | Item does not contain precious metal |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Automatic Data Processing Equipment: | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9) |
| Category | Code | Description |
|---|---|---|
| No Freight Information | ||