NSN 3040-01-109-4590 011094590
Product Details | SHOULDERED SHAFT
3040-01-109-4590 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Part Alternates: 011094590
Vehicular Equipment Components | Vehicular Power Transmission Components
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 25 | 01-109-4590 | 22914 ( SHAFT, SHOULDERED ) |
Drawings & Photos | NSN 2520-01-109-4590
Demand History | NSN 3040-01-109-4590
| Part Number | Request Date | QTY | Origin |
|---|---|---|---|
| 2520-01-109-4590 | 2008-08-239 | 26 | DIBBS |
| 2520-01-109-4590 | 2007-06-179 | 181 | DIBBS |
| 2520-01-109-4590 | 2006-06-171 | 79 | DIBBS |
| 2520-01-109-4590 | 2006-06-171 | 89 | DIBBS |
| 2520-01-109-4590 | 2006-05-142 | 111 | DIBBS |
| 2520-01-109-4590 | 2006-02-34 | 192 | DIBBS |
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 3040-01-109-4590
Technical Data | NSN 3040-01-109-4590
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL |
| FIRST END STYLE | 1 PLAIN |
| FIRST END DIAMETER | 1.7495 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 27 WOODRUFF KEYWAY AND CIRCULAR GROOVED |
| SECOND END GROOVE WIDTH | 0.0480 INCHES MINIMUM AND 0.0520 INCHES MAXIMUM |
| SECOND END GROOVE DIAMETER | 1.1980 INCHES MINIMUM AND 1.2060 INCHES MAXIMUM |
| SECOND END DISTANCE FROM END TO GROOVE | 0.156 INCHES MINIMUM AND 0.166 INCHES MAXIMUM |
| SECOND END KEYWAY WIDTH | 0.1865 INCHES MINIMUM AND 0.1880 INCHES MAXIMUM |
| SECOND END EXTERNAL KEYWAY LENGTH | 0.625 INCHES MINIMUM AND 0.645 INCHES MAXIMUM |
| SECOND END DISTANCE FROM KEYWAY CENTER TO END | 0.521 INCHES MINIMUM AND 0.551 INCHES MAXIMUM |
| SECOND END DIAMETER | 1.2495 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM |
| LARGEST STEP DIAMETER | 0.875 INCHES NOMINAL |
| OVERALL LENGTH | 4.900 INCHES MINIMUM AND 4.960 INCHES MAXIMUM |
| STEP QUANTITY | 2 |
Restrictions/Controls & Freight Information | NSN 3040-01-109-4590
| Category | Code | Description |
|---|---|---|
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Controlled Inventory Item Code: | U | UNCLASSIFIED |
| Category | Code | Description |
|---|---|---|
| No Freight Information | ||