NSN 2520-01-109-4592 011094592
Product Details | SHOULDERED SHAFT
2520-01-109-4592 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Part Alternates: 011094592
Vehicular Equipment Components | Vehicular Power Transmission Components
Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
---|---|---|---|
25 | 01-109-4592 | 22914 ( SHAFT, SHOULDERED ) |
Request a Quote
What Our Customers Say
Compare
Related Products | NSN 2520-01-109-4592
Technical Data | NSN 2520-01-109-4592
Characteristic | Specifications |
---|---|
MATERIAL | STEEL COMP 4140 |
FIRST END STYLE | 1 PLAIN |
FIRST END DIAMETER | 2.6200 INCHES NOMINAL |
END SIMILARITY | NOT IDENTICAL |
SECOND END STYLE | 32 TWO CIRCULAR GROOVES |
SECOND END GROOVE WIDTH | 0.1290 INCHES NOMINAL |
SECOND END GROOVE DIAMETER | 0.9790 INCHES NOMINAL |
SECOND END DISTANCE FROM END TO GROOVE | 0.485 INCHES NOMINAL |
SECOND END DIAMETER | 1.1100 INCHES NOMINAL |
SECOND END DISTANCE BETWEEN FIRST AND SECOND GROOVE CENTERS | 0.920 INCHES NOMINAL |
LARGEST STEP DIAMETER | 2.620 INCHES NOMINAL |
OVERALL LENGTH | 3.350 INCHES NOMINAL |
STEP QUANTITY | 3 |
III END ITEM IDENTIFICATION | 2350-01-048-5920 |
Restrictions/Controls & Freight Information | NSN 2520-01-109-4592
Category | Code | Description |
---|---|---|
Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
Category | Code | Description |
---|---|---|
No Freight Information |