Product Details | SHOULDERED SHAFT

2520-01-109-4594 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Part Alternates: 011094594

Vehicular Equipment Components | Vehicular Power Transmission Components

Supply Group (FSG) NSN Assign. NIIN
25 01-109-4594

Drawings & Photos | NSN 2520-01-109-4594


Demand History | NSN 2520-01-109-4594

Part Number Request Date QTY Origin
2520-01-109-4594 2006-06-157 35 DIBBS

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 2520-01-109-4594

Technical Data | NSN 2520-01-109-4594

Characteristic Specifications
MATERIAL STEEL
FIRST END STYLE 1 PLAIN
FIRST END DIAMETER 0.3110 INCHES MINIMUM AND 0.3115 INCHES MAXIMUM
END SIMILARITY NOT IDENTICAL
SECOND END STYLE 8 SPLINED
SECOND END DIAMETER 0.4100 INCHES NOMINAL
SECOND END SPLINE LENGTH 0.250 INCHES NOMINAL
SECOND END SPLINE MINOR DIAMETER 0.4290 INCHES NOMINAL
SECOND END SPLINE MAJOR DIAMETER 0.4970 INCHES NOMINAL
SECOND END SPLINE QUANTITY 2
LARGEST STEP DIAMETER 0.499 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
OVERALL LENGTH 2.850 INCHES MINIMUM AND 2.890 INCHES MAXIMUM
STEP QUANTITY 3
III END ITEM IDENTIFICATION 2350-01-048-5920

Restrictions/Controls & Freight Information | NSN 2520-01-109-4594

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Controlled Inventory Item Code:UUNCLASSIFIED
Category Code Description
No Freight Information