Product Details | AIRCRAFT STRUCTURAL COMPONENT SUPPORT

1560-01-173-0540 A device of various shapes to be permanently attached to the structure of an aircraft. It is designed to permanently mount and/or support an integral member, or group of members of the airframe in a proper position and bear the stress imposed by the components being supported. It may have mounting provisions, such as slots, holes, and/or attachments to facilitate installation. Excludes items which are primarily designed for dampening shock and/or vibration. Excludes BRACKET, ANGLE; BRACKET, DOUBLE ANGLE; BRACKET, SHELF; BRACKET, MOUNTING; BRACKET (1), STRUCTURAL COMPONENT, AIRCRAFT; and RADIUS BLOCK.

Part Alternates: 16W19210, 16W192-10, 1560-01-173-0540, 01-173-0540, 1560011730540, 011730540

Aircraft and Airframe Structural Components | Airframe Structural Components

Supply Group (FSG) NSN Assign. NIIN
15 29 FEB 1984 01-173-0540

Cross Reference | NSN 1560-01-173-0540

Part Number Cage Code Manufacturer
16W192-10 81755 LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN AERONAUTICS

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 1560-01-173-0540

Technical Data | NSN 1560-01-173-0540

Characteristic Specifications
SPECIAL FEATURES CORROSION RESISTANT STEEL BAR PH13-8MO PER AMS-5629; HEAT TREATED TO H1000 CONDITION PER FPS-3014; FINISH S457; BASE 2.760 IN. LG,.920 IN. W,.162 IN. THK,CONTAINS 2 0.530 IN. SLOTS; FORKED PROJECTION PERPENDICULAR TO BASE,1.640 IN. LG,1.650 IN. W,0.410 IN. THK AT BASE,0.110 IN. THK SLOT CENTERED IN THK 1.150 IN. DEEP; SERIAL NO. EFFECTIVITY 61 0001 0261; NHA 16W020-845; OPPOSITE P/N -9
III SUPPLEMENTARY FEATURES FUNCTIONAL DESCRIPTION:USED AS NO. 4 ACTUATOR LE FLAP ATTACHMENT SHEAR BRACKET
III END ITEM IDENTIFICATION ACFT MODEL F-16A/B
MANUFACTURERS CODE 81755
DESIGN CONTROL REFERENCE 16W192-10

Restrictions/Controls & Freight Information | NSN 1560-01-173-0540

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:BMunitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.)
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 104360 BARS I/S SHEET/TIN PLATE
Less than car load rating U 50
Less than truck load rating U 50.0
Water commodity Code 574 unknown
Originating Activity Code SU Ogden Air Logistics Center
Hill AFB, UT 84056-5609
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity
Air Special Handling Z No special handling required.
Special Handling Code Z unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable