NSN 9390-00-641-1805 S10151004, S10-15-1004, 8636010
Product Details | PROTECTION BELLOWS
9390-00-641-1805 A nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.20353400020Hardware, Commercial53420023Hardware, Weapon System93900046Miscellaneous Fabricated Nonmetallic Materials
Part Alternates: S10151004, S10-15-1004, 8636010, 9390-00-641-1805, 00-641-1805, 9390006411805, 006411805
Nonmetallic Fabricated Materials | Miscellaneous Fabricated Nonmetallic Materials
Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
---|---|---|---|
93 | 01 JAN 1963 | 00-641-1805 | 35168 ( BELLOWS, PROTECTION ) |
Request a Quote
What Our Customers Say
Compare
NSNs for Compare ( up to 4 ): Add 9390-00-641-1805
Related Products | NSN 9390-00-641-1805
Technical Data | NSN 9390-00-641-1805
Characteristic | Specifications |
---|---|
MATERIAL | RUBBER, SYNTHETIC |
DUROMETER HARDNESS RATING | NOT RATED |
EXTENDED LENGTH | 3.625 INCHES NOMINAL |
CONTRACTED LENGTH | 1.188 INCHES NOMINAL |
NEUTRAL LENGTH | 2.125 INCHES NOMINAL |
FLANGE BASE | NOT PROVIDED |
LARGE END OUTSIDE DIAMETER | 1.688 INCHES NOMINAL |
SMALL END OUTSIDE DIAMETER | 1.188 INCHES NOMINAL |
LARGE END INSIDE DIAMETER | 1.312 INCHES NOMINAL |
SMALL END INSIDE DIAMETER | 0.938 INCHES NOMINAL |
THICKNESS AT BOTH ENDS | 0.125 INCHES NOMINAL |
THICKNESS BETWEEN ENDS | 0.031 INCHES NOMINAL |
Restrictions/Controls & Freight Information | NSN 9390-00-641-1805
Category | Code | Description |
---|---|---|
Shelf-Life Code: | 7 | 36 months |
Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
Controlled Inventory Item Code: | U | UNCLASSIFIED |
Precious Metals Indicator Code: | U | Precious metal type is unknown |
Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
Category | Code | Description |
---|---|---|
No Freight Information |
Management | NSN 9390-00-641-1805
Category | Code | Description |
---|---|---|
Cognizance Codes | 9G | Navy-owned stocks of defense general material Naval Inventory Control Point, Mechanicsburg |
Source of Supply | S9G | Defense Supply Center Richmond Richmond, VA 23297 |
Agency | DN | Department of the Navy |
Service Organization | N | U.S. Navy |
Acquisition Advice Codes | V | TERMINAL ITEM # Identifies items in stock, but future procurement is not authorized. Requisitions may continue to be submitted until stocks are exhausted. Preferred item National Stock Number is normally provided by application of the phrase: When Exhausted Use (NSN). Requisitions will be submitted in accordance with IMM/Service requisitioning procedures as applicable. |
Controlled Item Code | U | UNCLASSIFIED |
Shelf Life Code | 7 | 36 months |