NSN 9390-00-541-2334 279760, 00-541-2334, 005412334
Product Details | PROTECTION BELLOWS
9390-00-541-2334 A nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.20353400020Hardware, Commercial53420023Hardware, Weapon System93900046Miscellaneous Fabricated Nonmetallic Materials
Part Alternates: 279760, 9390-00-541-2334, 00-541-2334, 9390005412334, 005412334
Nonmetallic Fabricated Materials | Miscellaneous Fabricated Nonmetallic Materials
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 93 | 01 JAN 1963 | 00-541-2334 | 35168 ( BELLOWS, PROTECTION ) |
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 9390-00-541-2334
Technical Data | NSN 9390-00-541-2334
| Characteristic | Specifications |
|---|---|
| MATERIAL | RUBBER,BUNA-N |
| DUROMETER HARDNESS RATING | 65.0 MINIMUM AND 75.0 MAXIMUM |
| EXTENDED LENGTH | 2.375 INCHES NOMINAL |
| CONTRACTED LENGTH | 1.125 INCHES NOMINAL |
| NEUTRAL LENGTH | ANY ACCEPTABLE |
| FLANGE BASE | PROVIDED |
| MOUNTING HOLE QUANTITY | 6 |
| MOUNTING HOLE DIAMETER | 0.188 INCHES NOMINAL |
| MOUNTING HOLE SPACING | EVENLY SPACED |
| LARGE END OUTSIDE DIAMETER | 2.750 INCHES NOMINAL |
| SMALL END OUTSIDE DIAMETER | 0.810 INCHES NOMINAL |
| LARGE END OUTSIDE LENGTH | 0.062 INCHES NOMINAL |
| SMALL END OUTSIDE LENGTH | 0.250 INCHES NOMINAL |
| LARGE END INSIDE DIAMETER | 1.438 INCHES NOMINAL |
| SMALL END INSIDE DIAMETER | 0.750 INCHES NOMINAL |
| LARGE END INSIDE LENGTH | 0.375 INCHES NOMINAL |
| SMALL END INSIDE LENGTH | 0.250 INCHES NOMINAL |
| THICKNESS | 0.031 INCHES NOMINAL |
| MANUFACTURERS CODE | 36378 |
| DESIGN CONTROL REFERENCE | 279760 |
Restrictions/Controls & Freight Information | NSN 9390-00-541-2334
| Category | Code | Description |
|---|---|---|
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
| Precious Metals Indicator Code: | U | Precious metal type is unknown |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Category | Code | Description |
|---|---|---|
| NMF Description | 183780 | TOOLS:BELLOWS IN PKGS |
| Less than car load rating | ||
| Less than truck load rating | J | 100.2 |
| Water commodity Code | 732 | unknown |
| Originating Activity Code | XX | |
| Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
| Air Commodity | E | Engineer supplies, other than those listed under code B. |
| Air Special Handling | Z | No special handling required. |
| Special Handling Code | 9 | unknonwn |
| HAZMAT | ||
| Type of Cargo | Z | No special type of cargo code applicable |