Product Details | CONTROL MOTOR

6105-01-325-6234 A motor which is designed to be operated from two independent voltage sources, in such a way that variations in one voltage source will determine the direction and speed of the motor. In the alternating current type the voltages are usually applied to a split-phase stator, whereas in the direct current type, one voltage is applied to the stator and the other to the armature. Low inertia and rapid reversibility are inherent characteristics of this type of motor. See also SERVOMOTOR, AUTOMATIC PILOT.

Part Alternates: DPM56DF4K7710, DPM56DF4-K7710, 6105-01-325-6234, 01-325-6234, 6105013256234, 013256234

Electric Wire, and Power and Distribution Equipment | Motors, Electrical

Supply Group (FSG) NSN Assign. NIIN
61 07 SEP 1990 01-325-6234

Cross Reference | NSN 6105-01-325-6234

Part Number Cage Code Manufacturer
DPM56DF4-K7710 46175 PEERLESS-WINSMITH, INC. DBA PEERLESS WINSMITH

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 6105-01-325-6234

Technical Data | NSN 6105-01-325-6234

Characteristic Specifications
OVERALL LENGTH 12.999 INCHES
OVERALL WIDTH 9.875 INCHES
OVERALL HEIGHT 7.500 INCHES
LENGTH OF SHAFT FROM HOUSING 1.875 INCHES SINGLE END
MOUNTING METHOD FACE
MOUNTING FACILITY TYPE AND QUANTITY 4 THREADED HOLE
INCLOSURE FEATURE OPEN PROTECTED
CURRENT TYPE DC INPUT
SHAFT END CHARACTERISTIC A9 SINGLE STYLE SINGLE END
KEYWAY WIDTH 0.187 INCHES NOMINAL SINGLE END
KEYWAY DEPTH 0.093 INCHES NOMINAL SINGLE END
SHAFT DIAMETER 0.875 INCHES NOMINAL SINGLE END
KEYWAY LENGTH 1.375 INCHES NOMINAL SINGLE END
SPECIAL FEATURES AN/MST-T1A
III STORAGE TYPE GENERAL PURPOSE WAREHOUSE

Restrictions/Controls & Freight Information | NSN 6105-01-325-6234

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Demilitarization Code:QStrategic List Item (SLI). Demilitarization not required. SLI are non-MLI(Munitions List Items) controlled by the U.S. Dept. of Commerce through the Export Administration Regulations (EAR) and indicated on the Commerce Control List (CCL). Each CCL entry is preceded by a four-digit Export Control Commerce Control List Item (CCLI) – MUT to the point of scrap required outside the United States. Inside the United States, MUT is required when the DEMIL integrity code (IC) is “3” and MUT is not required when the DEMIL IC is “6.”
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 062120 GENERATORS/MOTORS/PARTS NOI SUB1
Less than car load rating
Less than truck load rating P 77.5
Water commodity Code 590 unknown
Originating Activity Code TA Sacramento Air Logistics Center
McClellan AFB, CA 95652-5609
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 6105-01-325-6234

Category Code Description
Materiel Management Aggregation CodeFDSU:"ELECTRONIC WARFARE EQUIPMENT, NON-AIRBORNE"
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Source of SupplyFGZOgden Air Logistics Center
Hill AFB, UT 84056-5609
AgencyDFDepartment of the Air Force
Service OrganizationLLead Service - 22 (Repairable)
ReparabilityTAF Recoverable Assembly Management System (AFRAMS)
Acquisition Advice CodesCSERVICE/AGENCY-MANAGED (Service/Agency use only.) # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by individual Services supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Cognizance Codes9GNavy-owned stocks of defense general material
Naval Inventory Control Point, Mechanicsburg
Source of SupplyS9GDefense Supply Center Richmond
Richmond, VA 23297
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesVTERMINAL ITEM # Identifies items in stock, but future procurement is not authorized. Requisitions may continue to be submitted until stocks are exhausted. Preferred item National Stock Number is normally provided by application of the phrase: When Exhausted Use (NSN). Requisitions will be submitted in accordance with IMM/Service requisitioning procedures as applicable.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each