Product Details | ELECTRONIC SHIELDING GASKET

5999-00-252-4344 A shaped metallic item designed to increase the effectiveness of radio frequency/electromagnetic interference, or a nonmetallic item containing a wire mesh, metal, or other electrically conductive particles designed to provide environmental sealing and radio frequency/electromagnetic interference shielding. For bulk items see WIRE MESH, KNITTED or GASKETING MATERIAL, CONDUCTIVE.

Part Alternates: C356009071, 73263, 73-263, 0705020263, 07-0502-0263, 5999-00-252-4344, 00-252-4344, 5999002524344, 002524344

Electrical and Electronic Equipment Components | Miscellaneous Electrical and Electronic Components

Supply Group (FSG) NSN Assign. NIIN
59 22 JUN 1970 00-252-4344

Drawings & Photos | NSN 5999-00-252-4344


Cross Reference | NSN 5999-00-252-4344

Part Number Cage Code Manufacturer
07-0502-0263 12881 METEX CORPORATION DIV ELECTRONIC SHIELDING GROUP
07-0502-0263 18565 PARKER-HANNIFIN, CORPORATION DBA PARKER CHOMERICS DIV
73-263 12881 METEX CORPORATION DIV ELECTRONIC SHIELDING GROUP
73-263 18565 PARKER-HANNIFIN, CORPORATION DBA PARKER CHOMERICS DIV
C356009071 88818 KEARFOTT CORPORATION DBA KEARFOTT

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5999-00-252-4344

Technical Data | NSN 5999-00-252-4344

Characteristic Specifications
MATERIAL ALUMINUM ALLOY 5056 EMI/RFI CONDUCTOR RUBBER SILICONE CLASS Q ENVIRONMENTAL SEAL
MATERIAL DOCUMENT AND CLASSIFICATION AMS-4182 FED SPEC SINGLE MATERIAL RESPONSE EMI/RFI CONDUCTOR AMS-3195 FED SPEC SINGLE MATERIAL RESPONSE ENVIRONMENTAL SEAL
ENVIRONMENTAL PROTECTION MATERIAL LOCATION THROUGHOUT RF SHIELDING GASKET
CROSS-SECTIONAL SHAPE STYLE F69 EMI
CROSS-SECTIONAL HEIGHT 0.060 INCHES NOMINAL
STYLE DESIGNATOR B18B NON-CIRCULAR
HOLE DIAMETER 0.172 INCHES NOMINAL
OVERALL LENGTH 1.000 INCHES MINIMUM AND 1.016 INCHES MAXIMUM
OVERALL WIDTH 1.000 INCHES MINIMUM AND 1.016 INCHES MAXIMUM
APERTURE DIAMETER 0.625 INCHES MINIMUM AND 0.641 INCHES MAXIMUM
OUTSIDE CORNER RADIUS 0.141 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH 0.719 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH 0.719 INCHES NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH 0.141 INCHES MINIMUM AND 0.149 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH 0.141 INCHES MINIMUM AND 0.149 INCHES MAXIMUM
BOLT HOLE QUANTITY 4
III TEMP RATING -65.0 DEG CELSIUS AND 260.0 DEG CELSIUS

Restrictions/Controls & Freight Information | NSN 5999-00-252-4344

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Electro-static Discharge Susceptible:ANo known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity
Precious Metals Indicator Code:UPrecious metal type is unknown
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 061300 CIRCUIT BREAKER/SWITCH NOI
Less than car load rating
Less than truck load rating P 77.5
Water commodity Code 72D unknown
Originating Activity Code TX Defense Supply Center Columbus
Columbus, OH 43218
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable