Product Details | DIRECTIONAL COUPLER

5985-01-225-7474 An item specifically designed to be inserted into a transmission line, waveguide or coaxial transmission line to provide a suitable test outlet. The test signal is attenuated to a predetermined value.

Part Alternates: CLE50, CL-E50, 292553P6, 5985-01-225-7474, 01-225-7474, 5985012257474, 012257474

Electrical and Electronic Equipment Components | Antennas, Waveguides, and Related Equipment

Supply Group (FSG) NSN Assign. NIIN
59 06 FEB 1986 01-225-7474

Cross Reference | NSN 5985-01-225-7474

Part Number Cage Code Manufacturer
292553P6 94117 BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC.
CL-E50 64537 AEROFLEX CONTROL COMPONENTS, INC. DBA AEROFLEX / KDI

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5985-01-225-7474

Technical Data | NSN 5985-01-225-7474

Characteristic Specifications
PRECIOUS MATERIAL AND LOCATION CONTACT SURFACES GOLD
END ITEM IDENTIFICATION COUNTERMEASURES SET AN/ALQ-155
OVERALL LENGTH 1.160 INCHES NOMINAL
RADIO FREQUENCY RATING 2.0 GIGAHERTZ MINIMUM AND 4.1 GIGAHERTZ MAXIMUM
VOLTAGE STANDING WAVE RATIO AT REFERENCE FREQUENCY 1.20 TO 1 AT 2.0 TO 4.1 GHZ
PRECIOUS MATERIAL GOLD
DESIGN TYPE BIDIRECTIONAL
SPECIAL FEATURES CONNECTOR BODY CORROSION RESISTANT STEEL,PASSIVATED; CENTER CONTACT BERYLLIUM COPPER,GOLD PLATED; HOUSING SHALL BE ALUMINUM ALLOY 6061,PAINTED GRAY; OPERATING TEMPERATURE RANGE MINUS 55.0 TO PLUS 85.0 DEG C
POWER LOSS IN DECIBELS 10.0
FSC APPLICATION DATA ANTENNAS,WAVEGUIDES,AND RELATED EQUIPMENT
UNIT TYPE TRANSMISSION LINE
TERMINAL FITTING NAME SMA FEMALE COUPLING
OVERALL WIDTH 1.000 INCHES NOMINAL
UNPACKAGED UNIT WEIGHT 3.000 OUNCES
TERMINAL FITTING USAGE DESIGN MAIN LINE AND SECONDARY LINE
OVERALL HEIGHT 0.350 INCHES MINIMUM AND 0.410 INCHES MAXIMUM

Restrictions/Controls & Freight Information | NSN 5985-01-225-7474

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:BMunitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.)
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:GItem contains gold
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 061520 COUPLINGS CONDUIT CAST IRON
Less than car load rating
Less than truck load rating P 77.5
Water commodity Code 72D unknown
Originating Activity Code TG Warner-Robins Air Logistics Center
Robins AFB, GA 31098-5609
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5985-01-225-7474

Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Price ValidationE The current standard price is an estimated price.
  • Estimated Price challenges are allowed, but follow procedures in para 60.b. (3) of section L of this manual.
  • This code will be changed to a P code upon notification of a contract price or this code will be changed to an updated code upon determination of a valid price.
Materiel Management Aggregation CodeEWTG:AIRBORNE ELECTRONIC WARFARE EQUIPMENT
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesJNOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each