Product Details | RADIO FREQUENCY TRANSMISSION LINE

5985-01-140-4458 An item designed primarily for the conduction of radio frequency energy, and consisting of two or more conductors supported in fixed spatial relationship(s) along their own length. Since the characteristic impedance of the line is determined by the spatial relationships of the conductors, which are sufficiently rigid to maintain these relationships between supports, the configuration of the item is usually not susceptible to mechanical manipulation; that is, it is not normally flexible. Includes a single conductor inclosed in an outer concentric conductor (coaxial) or two or more conductors laid parallel. All types have low loss or special characteristics at high frequencies. May include fittings or terminations. For items having continuous homogeneous dielectric, see CABLE, RADIO FREQUENCY. See also LINE SECTION, RADIO FREQUENCY TRANSMISSION.

Part Alternates: 11442691-1, 5985-01-140-4458, 01-140-4458, 5985011404458, 114426911, 011404458

Electrical and Electronic Equipment Components | Antennas, Waveguides, and Related Equipment

Supply Group (FSG) NSN Assign. NIIN
59 12 OCT 1982 01-140-4458

Cross Reference | NSN 5985-01-140-4458

Part Number Cage Code Manufacturer
11442691-1 18876 U S ARMY AVIATION AND MISSILE COMMAND

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5985-01-140-4458

Technical Data | NSN 5985-01-140-4458

Characteristic Specifications
ACCOMMODATED CONDUCTOR TYPE COAXIAL
CONDUCTOR QUANTITY 1
CONDUCTOR SIZE 19 AWG
CONDUCTOR MATERIAL COPPER
CONDUCTOR SURFACE TREATMENT SILVER PLATED
CHARACTERISTIC IMPEDANCE IN OHMS 50.0
CAPACITANCE IN PICOFARADS PER UNIT LENGTH 29.3 PER FOOT
OPERATING VOLTAGE RATING 2500.0 VOLTS
OUTER CONDUCTOR INCLUDED
OUTSIDE DIAMETER 0.141 INCHES NOMINAL
MATERIAL COPPER, QQ-W-343, SOFT
SURFACE TREATMENT ANY ACCEPTABLE
OVERALL LENGTH 30.480 INCHES
TERMINAL FITTING INCLUDED
MANUFACTURERS CODE 18876
DESIGN CONTROL REFERENCE 11442691-1

Restrictions/Controls & Freight Information | NSN 5985-01-140-4458

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:DMunitions List Item or Commerce Control List Item. Demilitarization required. Total destruction of the item and components so as to preclude restoration or repair to a usable condition by melting, cutting, tearing, scratching, crushing, breaking, punching, neutralizing, etc. (As an alternate, burial or deep water dumping may be used when coordinated with the DoD Demilitarization Program Office.)
Precious Metals Indicator Code:SItem contains silver
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 061130 CABLE ASSEMBLY
Less than car load rating Q 70
Less than truck load rating P 77.5
Water commodity Code 743 unknown
Originating Activity Code BD U.S. Army Aviation and Missile Command
Redstone Arsenal, AL 35898-5230
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable