Product Details | FIXED ATTENUATOR

5985-01-140-5611 A device for reducing the strength of an alternating current signal by a fixed or predetermined amount, without causing appreciable signal distortion, by maintaining correct impedance match.

Part Alternates: AH30N, AH-30N, AN30N, AN-30N, 5985-01-140-5611, 01-140-5611, 5985011405611, 011405611

Electrical and Electronic Equipment Components | Antennas, Waveguides, and Related Equipment

Supply Group (FSG) NSN Assign. NIIN
59 14 OCT 1982 01-140-5611

Drawings & Photos | NSN 5985-01-140-5611


Cross Reference | NSN 5985-01-140-5611

Part Number Cage Code Manufacturer
AH-30N 00929 MICROLAB/FXR
AN-30N 00929 MICROLAB/FXR

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5985-01-140-5611

Technical Data | NSN 5985-01-140-5611

Characteristic Specifications
APPLICATION DESIGN TRANSMISSION LINE
INPUT IMPEDANCE RATING IN OHMS 50.0
OUTPUT IMPEDANCE RATING IN OHMS 50.0
FREQUENCY RANGE 0.000 HERTZ MINIMUM AND 18.000 GIGAHERTZ MAXIMUM
VOLTAGE STANDING WAVE RATIO 1.35 AND 1.50
VOLTAGE STANDING WAVE RATIO FREQUENCY RANGE 0.0 TO 12.4 GIGAHERTZ AND 12.4 TO 18.0 GIGAHERTZ
RF SIGNAL ATTENUATION IN DECIBELS 30.0
ATTENUATION ACCURACY IN DECIBELS -1.50 TO 1.50
FREQUENCY SENSITIVITY ATTENUATION IN DECIBELS NOT RATED
POWER RATING 1.0 WATTS AVERAGE AND 1.0 KILOWATTS PEAK
OPERATING TEMP RANGE -55.0 TO 125.0 DEG CELSIUS
TEMPERATURE SENSITIVITY ATTENUATION IN DECIBELS NOT RATED
BODY STYLE 1B ROUND, TERMINAL/TERMINALS ON OPPOSITE SURFACES
OVERALL LENGTH 2.300 INCHES NOMINAL
OVERALL DIAMETER ANY ACCEPTABLE
BODY MATERIAL METAL
BODY SURFACE TREATMENT NICKEL PLATED
TERMINAL TYPE AND QUANTITY 2 CONNECTOR
COAXIAL CONNECTOR SERIES DESIGNATION N
MOUNTING METHOD CONNECTOR

Restrictions/Controls & Freight Information | NSN 5985-01-140-5611

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:DMunitions List Item or Commerce Control List Item. Demilitarization required. Total destruction of the item and components so as to preclude restoration or repair to a usable condition by melting, cutting, tearing, scratching, crushing, breaking, punching, neutralizing, etc. (As an alternate, burial or deep water dumping may be used when coordinated with the DoD Demilitarization Program Office.)
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 060535 AERIAL/ANTENNAS DIRECTIONAL
Less than car load rating
Less than truck load rating W Rating Variable
Water commodity Code 723 unknown
Originating Activity Code TX Defense Supply Center Columbus
Columbus, OH 43218
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5985-01-140-5611

Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Materiel Management Aggregation CodeEHSX:ELECTRONIC COMPONENTS
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesJNOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
Controlled Item Code7NON-SENSITIVE (SRC-N/A) - UNCLASSIFIED AA&E: OR ITEMS ASSIGNED A DEMILITARIZATION CODE OTHER THAN A, B, Q, OR P FOR WHICH ANOTHER CIIC IS INAPPROPRIATE. (NOTE: THE LOSS, THEFT, UNLAWFUL DISPOSITION, AND/OR RECOVERY OF AN ITEM WITH CIIC 7 WILL BE INVESTIGATED IN ACCORDANCE WITH DOD-4000-25-2-M AND DOD 7200.14-R, VOLUME 12, CHAPTER 7).
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each