Product Details | QUARTZ CRYSTAL UNIT

5955-01-308-2082 An item which consists of a quartz crystal resonator(s), suitably mounted in a HOLDER, QUARTZ CRYSTAL.

Part Alternates: CX1V0332768KHZB, CX1V0332768KHZBM, CX-1V-B03-32.768, CX1VB0332768, 5955-01-308-2082, 01-308-2082, 5955013082082, 013082082

Electrical and Electronic Equipment Components | Oscillators and Piezoelectric Crystals

Supply Group (FSG) NSN Assign. NIIN
59 24 SEP 1989 01-308-2082

Drawings & Photos | NSN 5955-01-308-2082


Cross Reference | NSN 5955-01-308-2082

Part Number Cage Code Manufacturer
CX-1V-03-32.768KHZ (B/M) 51791 STATEK CORPORATION
CX-1V-03-32.768KHZ(B 51791 STATEK CORPORATION
CX-1V-B03-32.768 61441 SARONIX

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5955-01-308-2082

Technical Data | NSN 5955-01-308-2082

Characteristic Specifications
MODE OF OSCILLATION FUNDAMENTAL
CIRCUIT RESONANCE SERIES RESONANCE
SHUNT CAPACITANCE IN PICOFARADS 1.3 NOMINAL
SPECIFIED FREQUENCY 32.768 KILOHERTZ
FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT -0.004 TO 0.004
OPERATING TEMP RANGE -55.0 TO 125.0 DEG CELSIUS
EQUIVALENT RESISTANCE VALUE IN OHMS 40.0 MINIMUM AND 55.0 MAXIMUM
DRIVE LEVEL RATING 1.0 MICROWATTS MAXIMUM
STYLE DESIGNATOR 48 RECTANGULAR BODY, PIN TERMINALS
OVERALL LENGTH 0.280 INCHES NOMINAL
TERMINAL LENGTH 0.125 INCHES MINIMUM
OVERALL WIDTH 0.330 INCHES MAXIMUM
BODY LENGTH 0.155 INCHES MAXIMUM
OVERALL THICKNESS 0.080 INCHES MAXIMUM
TERMINAL WIDTH 0.018 INCHES NOMINAL
TERMINAL THICKNESS 0.010 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN TERMINALS 0.300 INCHES NOMINAL
HOLDER COVER MATERIAL CERAMIC
III END ITEM IDENTIFICATION 4920-01-187-4068 TEST SYSTEM,AUTOMATIC,RADAR

Restrictions/Controls & Freight Information | NSN 5955-01-308-2082

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Demilitarization Code:QStrategic List Item (SLI). Demilitarization not required. SLI are non-MLI(Munitions List Items) controlled by the U.S. Dept. of Commerce through the Export Administration Regulations (EAR) and indicated on the Commerce Control List (CCL). Each CCL entry is preceded by a four-digit Export Control Commerce Control List Item (CCLI) – MUT to the point of scrap required outside the United States. Inside the United States, MUT is required when the DEMIL integrity code (IC) is “3” and MUT is not required when the DEMIL IC is “6.”
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 063025 SEMICONDUCTORS/DEVICES NOI ETC
Less than car load rating
Less than truck load rating W Rating Variable
Water commodity Code 72D unknown
Originating Activity Code TH Defense Supply Center Columbus
Columbus, OH 43215
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5955-01-308-2082

Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each