NSN 5950-00-623-3611 81R434, 00-623-3611, 006233611
Product Details | ELECTRICAL COIL
5950-00-623-3611 An item generally consisting of one or more turns of wire or similar conductive material (in special cases it may be considered as a partial turn). It is specifically designed to concentrate magnetic flux generated by the flow of an electric current, to induce in itself an electromotive force, and to add or subtract inductive reactance in a circuit. It may include tuning devices, integral resistors and capacitors; however, excludes FILTER (as modified). For coils wound on resistors which are designed to be inserted into the circuit of a radio frequency stage to suppress high frequency parasitic oscillations, see SUPPRESSOR, PARASITIC..
Part Alternates: 81R434, 5950-00-623-3611, 00-623-3611, 5950006233611, 006233611
Electrical and Electronic Equipment Components | Coils and Transformers
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | 01 JAN 1963 | 00-623-3611 | 32494 ( COIL, ELECTRICAL ) |
Demand History | NSN 5950-00-623-3611
| Part Number | Request Date | QTY | Origin |
|---|---|---|---|
| 81R434 | 2023-10-278 | 10 | DIBBS |
| 81R434 | 2023-09-250 | 10 | DIBBS |
| 81R434 | 2023-04-117 | 24 | DIBBS |
| 81R434 | 2023-02-47 | 22 | DIBBS |
| 81R434 | 2022-10-291 | 65 | DIBBS |
| 81R434 | 2022-07-195 | 7 | DIBBS |
| 81R434 | 2022-06-160 | 7 | DIBBS |
| 81R434 | 2022-06-153 | 8 | DIBBS |
| 81R434 | 2022-05-130 | 10 | DIBBS |
| 81R434 | 2022-05-125 | 1 | DIBBS |
| 81R434 | 2022-04-111 | 5 | DIBBS |
| 81R434 | 2022-03-76 | 1 | DIBBS |
| 81R434 | 2021-11-318 | 14 | DIBBS |
| 81R434 | 2021-10-297 | 12 | DIBBS |
| 81R434 | 2021-08-222 | 12 | DIBBS |
| 81R434 | 2021-07-210 | 27 | DIBBS |
| 81R434 | 2021-07-182 | 11 | DIBBS |
| 81R434 | 2021-04-91 | 17 | DIBBS |
| 81R434 | 2020-04-106 | 7 | DIBBS |
| 81R434 | 2020-04-104 | 73 | DIBBS |
| 81R434 | 2020-04-97 | 11 | DIBBS |
| 81R434 | 2020-03-89 | 73 | DIBBS |
| 81R434 | 2020-03-86 | 11 | DIBBS |
| 81R434 | 2019-09-252 | 7 | DIBBS |
| 81R434 | 2019-08-241 | 7 | DIBBS |
| 81R434 | 2019-08-228 | 39 | DIBBS |
| 81R434 | 2019-08-217 | 39 | DIBBS |
| 81R434 | 2019-07-196 | 21 | DIBBS |
| 81R434 | 2019-07-185 | 21 | DIBBS |
| 81R434 | 2019-04-115 | 13 | DIBBS |
| 81R434 | 2019-01-24 | 13 | DIBBS |
| 5950-00-623-3611 | 2018-11-312 | 9 | DIBBS |
| 5950-00-623-3611 | 2018-02-35 | 10 | DIBBS |
| 5950-00-623-3611 | 2016-10-278 | 27 | DIBBS |
| 5950-00-623-3611 | 2016-02-53 | 63 | DIBBS |
| 5950-00-623-3611 | 2016-02-35 | 31 | DIBBS |
| 5950-00-623-3611 | 2015-02-43 | 16 | DIBBS |
| 5950-00-623-3611 | 2014-12-349 | 59 | DIBBS |
| 5950-00-623-3611 | 2014-11-309 | 5 | DIBBS |
| 5950-00-623-3611 | 2014-10-281 | 4 | DIBBS |
| 5950-00-623-3611 | 2014-10-279 | 8 | DIBBS |
| 5950-00-623-3611 | 2014-09-268 | 7 | DIBBS |
| 5950-00-623-3611 | 2014-08-225 | 23 | DIBBS |
| 5950-00-623-3611 | 2014-07-211 | 16 | DIBBS |
| 5950-00-623-3611 | 2014-03-76 | 9 | DIBBS |
| 5950-00-623-3611 | 2014-03-71 | 5 | DIBBS |
| 5950-00-623-3611 | 2014-03-69 | 9 | DIBBS |
| 5950-00-623-3611 | 2014-02-56 | 5 | DIBBS |
| 5950-00-623-3611 | 2014-02-37 | 11 | DIBBS |
| 5950-00-623-3611 | 2014-01-05 | 18 | DIBBS |
| 5950-00-623-3611 | 2013-10-282 | 8 | DIBBS |
| 5950-00-623-3611 | 2013-09-262 | 24 | DIBBS |
| 5950-00-623-3611 | 2013-08-233 | 24 | DIBBS |
| 5950-00-623-3611 | 2010-05-126 | 26 | DIBBS |
| 5950-00-623-3611 | 2010-02-42 | 14 | DIBBS |
| 5950-00-623-3611 | 2009-12-348 | 45 | DIBBS |
| 5950-00-623-3611 | 2009-04-106 | 17 | DIBBS |
| 5950-00-623-3611 | 2008-11-318 | 10 | DIBBS |
| 5950-00-623-3611 | 2008-09-248 | 11 | DIBBS |
| 5950-00-623-3611 | 2008-09-247 | 14 | DIBBS |
| 5950-00-623-3611 | 2007-05-127 | 6 | DIBBS |
| 5950-00-623-3611 | 2007-04-117 | 8 | DIBBS |
| 5950-00-623-3611 | 2007-04-108 | 5 | DIBBS |
| 5950-00-623-3611 | 2007-03-89 | 13 | DIBBS |
| 5950-00-623-3611 | 2007-02-44 | 16 | DIBBS |
Cross Reference | NSN 5950-00-623-3611
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 81R434 | 73760 | ITT CORPORATION DBA ITT AEROSPACE CONTROLS |
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
Ernie G.
Honeywell
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
NSNs for Compare ( up to 4 ): Add 5950-00-623-3611
Related Products | NSN 5950-00-623-3611
Technical Data | NSN 5950-00-623-3611
| Characteristic | Specifications |
|---|---|
| TERMINAL TYPE AND QUANTITY | 2 PIN |
| MOUNTING METHOD | UNTHREADED HOLE SINGLE GROUP |
| MOUNTING FACILITY QUANTITY | 4 SINGLE GROUP |
| MOUNTING HOLE DIAMETER | 0.255 INCHES NOMINAL SINGLE GROUP |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.412 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.422 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP |
| INCLOSURE TYPE | FULLY INCLOSED |
| BODY LENGTH | 2.704 INCHES NOMINAL |
| BODY OUTSIDE DIAMETER | 1.711 INCHES NOMINAL |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
Restrictions/Controls & Freight Information | NSN 5950-00-623-3611
| Category | Code | Description |
|---|---|---|
| Shelf-Life Code: | 0 | Nondeteriorative |
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Demilitarization Code: | B | Munitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.) |
| Controlled Inventory Item Code: | U | UNCLASSIFIED |
| Precious Metals Indicator Code: | U | Precious metal type is unknown |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Category | Code | Description |
|---|---|---|
| NMF Description | 063420 | TRANSFORMERS,NOI,OR TRANSFORMER PAR |
| Less than car load rating | ||
| Less than truck load rating | W | Rating Variable |
| Water commodity Code | 72D | unknown |
| Originating Activity Code | XX | |
| Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
| Air Commodity | H | Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc. |
| Air Special Handling | Z | No special handling required. |
| Special Handling Code | 9 | unknonwn |
| HAZMAT | ||
| Type of Cargo | Z | No special type of cargo code applicable |
Management | NSN 5950-00-623-3611
Air Force
Navy| Category | Code | Description |
|---|---|---|
| Budget Code | 9 | General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors. |
| Materiel Management Aggregation Code | EH | SX:ELECTRONIC COMPONENTS |
| Price Validation | N | The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
|
| Fund Code | SF | Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point. |
| Source of Supply | SMS | Defense Logistics Agency Enterprise Business Systems |
| Agency | DF | Department of the Air Force |
| Service Organization | F | U.S. Air Force |
| Reparability | N | Stock Fund (except Munitions) |
| Acquisition Advice Codes | D | DoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures. |
| Controlled Item Code | U | UNCLASSIFIED |
| Shelf Life Code | 0 | Nondeteriorative |
| Purchasing | QTY UOM |
1 EA : Each |
| Category | Code | Description |
|---|---|---|
| Cognizance Codes | 9B | Navy-owned stocks of DLA material Naval Inventory Control Point, Mechanicsburg |
| Source of Supply | SMS | Defense Logistics Agency Enterprise Business Systems |
| Agency | DN | Department of the Navy |
| Service Organization | N | U.S. Navy |
| Acquisition Advice Codes | V | TERMINAL ITEM # Identifies items in stock, but future procurement is not authorized. Requisitions may continue to be submitted until stocks are exhausted. Preferred item National Stock Number is normally provided by application of the phrase: When Exhausted Use (NSN). Requisitions will be submitted in accordance with IMM/Service requisitioning procedures as applicable. |
| Controlled Item Code | U | UNCLASSIFIED |
| Shelf Life Code | 0 | Nondeteriorative |
| Purchasing | QTY UOM |
1 EA : Each |