NSN 5935-00-609-4132 D170366, 8516206, 00-609-4132
Product Details | ELECTRICAL RECEPTACLE CONNECTOR
5935-00-609-4132 An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
Part Alternates: D170366, 8516206, 5935-00-609-4132, 00-609-4132, 5935006094132, 006094132
Electrical and Electronic Equipment Components | Connectors, Electrical
Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
---|---|---|---|
59 | 00-609-4132 | 15093 ( CONNECTOR, RECEPTACLE, ELECTRICAL ) |
Request a Quote
What Our Customers Say
Compare
Related Products | NSN 5935-00-609-4132
Technical Data | NSN 5935-00-609-4132
Characteristic | Specifications |
---|---|
BODY STYLE | 5L STRAIGHT SHAPE W/CABLE CLAMP |
OVERALL LENGTH | 3.062 INCHES NOMINAL |
OVERALL HEIGHT | 0.992 INCHES MINIMUM AND 1.000 INCHES MAXIMUM |
OVERALL WIDTH | 0.992 INCHES MINIMUM AND 1.000 INCHES MAXIMUM |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.716 INCHES MINIMUM AND 0.722 INCHES MAXIMUM |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.716 INCHES MINIMUM AND 0.722 INCHES MAXIMUM |
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.750 INCHES NOMINAL |
UNTHREADED MOUNTING HOLE DIAMETER | 0.125 INCHES NOMINAL |
CONNECTOR LOCKING METHOD | EXTERNALLY THREADED SHELL |
THREADED DEVICE TYPE | BACK SHELL AND COUPLING FACILITY |
THREAD CLASS | 2A AND 2A |
THREAD DIRECTION | RIGHT-HAND AND RIGHT-HAND |
CONNECTOR CABLE STRAIN RELIEF METHOD | CONDUIT NUT |
SHELL TYPE | SOLID |
SHELL MATERIAL | COPPER ALLOY |
SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-611,COMP B,1/2 H FED SPEC SINGLE MATERIAL RESPONSE |
SHELL SURFACE TREATMENT | SILVER |
MATING END QUANTITY | 1 |
INSERT MATERIAL | PLASTIC POLYSTYRENE SINGLE MATING END |
INCLUDED CONTACT QUANTITY | 1 SINGLE MATING END SINGLE CONTACT GROUPING |
CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
INCLUDED CONTACT TYPE | COAXIAL SOCKET SINGLE MATING END SINGLE CONTACT GROUPING |
RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS | 50.0 SINGLE MATING END SINGLE CONTACT GROUPING |
CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
III PRECIOUS MATERIAL | SILVER |
III PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACE SILVER |
Restrictions/Controls & Freight Information | NSN 5935-00-609-4132
Category | Code | Description |
---|---|---|
Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
Category | Code | Description |
---|---|---|
No Freight Information |