NSN 5935-00-232-2485 MM4422SGDF, MM44-22SGDF, MM4422SGDFS50
Product Details | ELECTRICAL RECEPTACLE CONNECTOR
5935-00-232-2485 An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
Part Alternates: MM4422SGDF, MM44-22SGDF, MM4422SGDFS50, MM44-22SGDFS50, MM4422SSGDF50, MM44-22SSGDF50, MM44SSGDF50, MMS2244SL2DGFM500, MMS22-44SL2DGFM500, MMS22G544SL2, MMS22G5-44SL2, QEMM4422SGDS50, QEMM44-22SGDS50, QEMM4422SGDS50NI, QEMM44-22SGDS50NI, UM144F1SL00901, UMI44F1SL009001Q, UMI44F1SLDM7050GC, UMI44F1SLDM70-50GC, 703044SS1033, 7030-44SS1033, 81C842109, 81C842-109, 81C883003, 81C883-003, 90050210, 900502-10, 90305010, 903050-10, 5935-00-232-2485, 00-232-2485, 5935002322485, 002322485
Electrical and Electronic Equipment Components | Connectors, Electrical
Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
---|---|---|---|
59 | 28 OCT 1970 | 00-232-2485 | 15093 ( CONNECTOR, RECEPTACLE, ELECTRICAL ) |
Cross Reference | NSN 5935-00-232-2485
Part Number | Cage Code | Manufacturer |
---|---|---|
7030-44SS1033 | 03877 | GILBERT ENGINEERING CO INC/INCON SUB OF TRANSITRON ELECTRONIC CORP |
81C842-109 | 04660 | AIL SYSTEMS INC SUB OF EATON CORP |
81C883-003 | 04660 | AIL SYSTEMS INC SUB OF EATON CORP |
900502-10 | 06481 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
903050-10 | 06481 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
MM44-22SGDF | 95238 | WINCHESTER ELECTRONICS CORPORATION DBA WINCHESTER ELECTRONICS |
MM44-22SGDFS50 | 95238 | WINCHESTER ELECTRONICS CORPORATION DBA WINCHESTER ELECTRONICS |
MM44-22SSGDF50 | 95238 | WINCHESTER ELECTRONICS CORPORATION DBA WINCHESTER ELECTRONICS |
MM44SSGDF50 | 95238 | WINCHESTER ELECTRONICS CORPORATION DBA WINCHESTER ELECTRONICS |
MMS22-44SL2DGFM500 | 91637 | VISHAY DALE ELECTRONICS, INC. DIV VISHAY ANGSTROHM & DALE |
MMS22G5-44SL2 | 09969 | VISHAY DALE ELECTRONICS, INC. |
QEMM44-22SGDS50 | 95238 | WINCHESTER ELECTRONICS CORPORATION DBA WINCHESTER ELECTRONICS |
QEMM44-22SGDS50NI | 95238 | WINCHESTER ELECTRONICS CORPORATION DBA WINCHESTER ELECTRONICS |
UM144F1SL00901 | 97954 | U S COMPONENTS INC |
UMI44F1SL009001Q | 97954 | U S COMPONENTS INC |
UMI44F1SLDM70-50GC | 97954 | U S COMPONENTS INC |
Request a Quote
What Our Customers Say
Compare
Related Products | NSN 5935-00-232-2485
Technical Data | NSN 5935-00-232-2485
Characteristic | Specifications |
---|---|
BODY STYLE | 17G STRAIGHT SHAPE |
OVERALL LENGTH | 1.485 INCHES MINIMUM AND 1.515 INCHES MAXIMUM |
OVERALL HEIGHT | 0.516 INCHES MINIMUM AND 0.546 INCHES MAXIMUM |
OVERALL WIDTH | 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 1.276 INCHES MINIMUM AND 1.286 INCHES MAXIMUM |
CONNECTOR LOCKING METHOD | JACKSCREW-SOCKET |
THREADED DEVICE TYPE | COUPLING FACILITY AND MOUNTING STUD |
THREAD SERIES DESIGNATOR | UNC AND UNC AND UNC |
NOMINAL THREAD SIZE | 0.086 INCHES AND 0.086 INCHES AND 0.086 INCHES |
THREAD CLASS | 2A AND 2B AND 2A |
THREAD QUANTITY PER INCH | 56 AND 56 AND 56 |
THREAD DIRECTION | RIGHT-HAND AND RIGHT-HAND AND RIGHT-HAND |
POLARIZATION METHOD | JACKSCREW |
JACKSCREW TYPE AND LOCATION | MALE LEFT-HAND AND FEMALE RIGHT-HAND |
MATING END QUANTITY | 1 |
CONTACT POSITION ARRANGEMENT STYLE | BXAG 44 SINGLE MATING END |
INSERT MATERIAL | PLASTIC DIALLYL PHTHALATE SINGLE MATING END |
INSERT MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-19833,TYPE GDI-30F MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END |
INCLUDED CONTACT QUANTITY | 44 SINGLE MATING END SINGLE CONTACT GROUPING |
CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
INCLUDED CONTACT TYPE | ROUND SOCKET SINGLE MATING END SINGLE CONTACT GROUPING |
CONTACT MAXIMUM CURRENT RATING IN AMPS | 5.0 SINGLE MATING END SINGLE CONTACT GROUPING |
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 500.0 SINGLE MATING END SINGLE CONTACT GROUPING |
CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
CONTACT SURFACE TREATMENT | GOLD AND NICKEL SINGLE MATING END SINGLE CONTACT GROUPING |
TERMINAL TYPE | SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING |
TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
ENVIRONMENTAL PROTECTION | VIBRATION RESISTANT AND SALT WATER RESISTANT |
III PRECIOUS MATERIAL | GOLD |
III PRECIOUS MATERIAL AND WEIGHT | 0.044 GOLD GRAINS, TROY |
III PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACE GOLD |
Restrictions/Controls & Freight Information | NSN 5935-00-232-2485
Category | Code | Description |
---|---|---|
Shelf-Life Code: | 0 | Nondeteriorative |
Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
Demilitarization Code: | Q | Strategic List Item (SLI). Demilitarization not required. SLI are non-MLI(Munitions List Items) controlled by the U.S. Dept. of Commerce through the Export Administration Regulations (EAR) and indicated on the Commerce Control List (CCL). Each CCL entry is preceded by a four-digit Export Control Commerce Control List Item (CCLI) – MUT to the point of scrap required outside the United States. Inside the United States, MUT is required when the DEMIL integrity code (IC) is “3” and MUT is not required when the DEMIL IC is “6.” |
Controlled Inventory Item Code: | U | UNCLASSIFIED |
Electro-static Discharge Susceptible: | A | No known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity |
Precious Metals Indicator Code: | G | Item contains gold |
Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
Category | Code | Description |
---|---|---|
NMF Description | 061680 | ELEC WIRING PLUGS ETC |
Less than car load rating | ||
Less than truck load rating | W | Rating Variable |
Water commodity Code | 658 | unknown |
Originating Activity Code | TX | Defense Supply Center Columbus Columbus, OH 43218 |
Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
Air Commodity | H | Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc. |
Air Special Handling | Z | No special handling required. |
Special Handling Code | 9 | unknonwn |
HAZMAT | ||
Type of Cargo | Z | No special type of cargo code applicable |
Management | NSN 5935-00-232-2485
Category | Code | Description |
---|---|---|
Budget Code | 9 | General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors. |
Materiel Management Aggregation Code | EH | SX:ELECTRONIC COMPONENTS |
Price Validation | N | The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
|
Fund Code | SF | Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point. |
Source of Supply | SMS | Defense Logistics Agency Enterprise Business Systems |
Agency | DF | Department of the Air Force |
Service Organization | F | U.S. Air Force |
Reparability | N | Stock Fund (except Munitions) |
Acquisition Advice Codes | Z | INSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures. |
Controlled Item Code | U | UNCLASSIFIED |
Shelf Life Code | 0 | Nondeteriorative |
Purchasing | QTY UOM |
1 EA : Each |
Category | Code | Description |
---|---|---|
Cognizance Codes | 9B | Navy-owned stocks of DLA material Naval Inventory Control Point, Mechanicsburg |
Source of Supply | SMS | Defense Logistics Agency Enterprise Business Systems |
Agency | DN | Department of the Navy |
Service Organization | N | U.S. Navy |
Acquisition Advice Codes | Z | INSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures. |
Controlled Item Code | U | UNCLASSIFIED |
Shelf Life Code | 0 | Nondeteriorative |
Purchasing | QTY UOM |
1 EA : Each |