Product Details | ELECTRICAL RECEPTACLE CONNECTOR

5935-00-195-3619 An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.

Part Alternates: MS3128E2016SW, MS3128E20-16SW, MILC0026482, 5935-00-195-3619, 00-195-3619, 5935001953619, 001953619

Electrical and Electronic Equipment Components | Connectors, Electrical

Supply Group (FSG) NSN Assign. NIIN
59 00-195-3619

Drawings & Photos | NSN 5935-00-195-3619


Cross Reference | NSN 5935-00-195-3619

Part Number Cage Code Manufacturer
MIL-C-26482 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
MILC0026482 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
MS3128E20-16SW 96906 MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS
MS3128F20-16SW 96906 MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5935-00-195-3619

Technical Data | NSN 5935-00-195-3619

Characteristic Specifications
BODY STYLE 5G STRAIGHT SHAPE, EXTERNAL COUPLING W/BACKSHELL
OVERALL LENGTH 1.709 INCHES MAXIMUM
OVERALL HEIGHT 1.688 INCHES MAXIMUM
OVERALL WIDTH 1.688 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT 1.156 INCHES NOMINAL
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH 1.156 INCHES NOMINAL
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE 0.556 INCHES MINIMUM AND 0.587 INCHES MAXIMUM
UNTHREADED MOUNTING HOLE DIAMETER 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
CONNECTOR LOCKING METHOD BAYONET PIN
SHELL TYPE SOLID
SHELL MATERIAL ALUMINUM ALLOY
SHELL SURFACE TREATMENT CADMIUM
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
POLARIZATION METHOD KEY, MULTIPLE KEY GROOVE
INSERT POSITION IN DEG 122.0
MATING END QUANTITY 1
CONTACT POSITION ARRANGEMENT STYLE ASAD 20-16 SINGLE MATING END
INCLUDED CONTACT QUANTITY 16 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT REMOVABILITY REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE ROUND SOCKET SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS 1000.0 SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE CRIMP SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL LOCATION BACK SINGLE MATING END SINGLE CONTACT GROUPING
ENVIRONMENTAL PROTECTION MOISTURE PROOF AND SALT WATER RESISTANT AND VIBRATION RESISTANT
SPECIAL FEATURES FOUR 0.150 IN. DIA INTERSECTED MTG HOLES SPACED 1.297 IN. BY 1.297 IN.
TEST DATA DOCUMENT 81349-MIL-C-26482 SPECIFICATION
SPECIFICATION/STANDARD DATA 81349-MIL-C-26482 GOVERNMENT SPECIFICATION
MANUFACTURERS CODE 81349
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE MILC0026482
MANUFACTURERS CODE 96906
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE MS3128E20-16SW

Restrictions/Controls & Freight Information | NSN 5935-00-195-3619

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Category Code Description
No Freight Information