Product Details | ELECTROLYTIC FIXED CAPACITOR

5910-01-575-6148 A capacitor, whose capacitance value cannot be adjusted or varied, having a chemically formed film as the dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.

Part Alternates: M39003/3-2022, M3900332022, 5910-01-575-6148, 01-575-6148, 5910015756148, 015756148

Electrical and Electronic Equipment Components | Capacitors

Supply Group (FSG) NSN Assign. NIIN
59 08 JUL 2009 01-575-6148

Cross Reference | NSN 5910-01-575-6148

Part Number Cage Code Manufacturer
M39003/3-2022 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5910-01-575-6148

Technical Data | NSN 5910-01-575-6148

Characteristic Specifications
RELIABILITY INDICATOR ESTABLISHED
NONDERATED OPERATING TEMP -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM
TOLERANCE RANGE PER SECTION -10.00/+10.00 PERCENT SINGLE SECTION
FEATURES PROVIDED HERMETICALLY SEALED CASE
SCHEMATIC DIAGRAM DESIGNATOR ELECTRODE(S) GROUNDED TO CASE, W/GND TERMINAL
BODY STYLE W/O MTG FACILITIES, AXIAL TERMINALS
BODY LENGTH 0.474 INCHES NOMINAL
TERMINAL TYPE AND QUANTITY 2 UNINSULATED WIRE LEAD
CAPACITIVE ELECTRODE MATERIAL TANTALUM
CAPACITANCE VALUE PER SECTION 68.000 MICROFARADS SINGLE SECTION
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION 10.0 DC SINGLE SECTION
RELIABILITY FAILURE RATE LEVEL IN PERCENT 0.100
BODY DIAMETER 0.185 INCHES NOMINAL
TERMINAL LENGTH 1.500 INCHES NOMINAL
ELECTRICAL POLARIZATION POLARIZED

Restrictions/Controls & Freight Information | NSN 5910-01-575-6148

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:QStrategic List Item (SLI). Demilitarization not required. SLI are non-MLI(Munitions List Items) controlled by the U.S. Dept. of Commerce through the Export Administration Regulations (EAR) and indicated on the Commerce Control List (CCL). Each CCL entry is preceded by a four-digit Export Control Commerce Control List Item (CCLI) – MUT to the point of scrap required outside the United States. Inside the United States, MUT is required when the DEMIL integrity code (IC) is “3” and MUT is not required when the DEMIL IC is “6.”
Electro-static Discharge Susceptible:ANo known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
No Freight Information