Product Details | MICA DIELECTRIC FIXED CAPACITOR

5910-01-027-8094 A capacitor, whose capacitance value cannot be adjusted or varied, having natural sheet mica or reconstituted flaked mica formed into sheets as the dielectric material. It may be a single unit, or consist of two or more fixed units which cannot be separated.

Part Alternates: 5910-01-027-8094, 01-027-8094, 5910010278094, 010278094

Electrical and Electronic Equipment Components | Capacitors

Supply Group (FSG) NSN Assign. NIIN
59 01-027-8094

Drawings & Photos | NSN 5910-01-027-8094


Cross Reference | NSN 5910-01-027-8094

Part Number Cage Code Manufacturer
CM04ED560FP3 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
CMR04E560FPDM 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
CMR04E560FPDR 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
MIL-C-39001/5 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
MILC5-18 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5910-01-027-8094

Technical Data | NSN 5910-01-027-8094

Characteristic Specifications
CAPACITANCE VALUE PER SECTION 56.000 PICOFARADS SINGLE SECTION
TOLERANCE RANGE PER SECTION -1.00 TO 1.00 PERCENT SINGLE SECTION
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION 500.0 DC SINGLE SECTION
TEMP COEFFICIENT OF CAPACITANCE RANGE PER SECTION IN PPM PER DEG CELSIUS -20.0 TO 100.0 SINGLE SECTION
NONDERATED OPERATING TEMP -55.0 DEG CELSIUS MINIMUM AND 150.0 DEG CELSIUS MAXIMUM
BODY STYLE 27A W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
BODY LENGTH 0.300 INCHES MINIMUM AND 0.370 INCHES MAXIMUM
BODY WIDTH 0.340 INCHES MAXIMUM
BODY HEIGHT 0.100 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
SCHEMATIC DIAGRAM DESIGNATOR 1C NO COMMON OR GROUNDED ELECTRODE(S)
TERMINAL TYPE AND QUANTITY 2 UNINSULATED WIRE LEAD
TERMINAL LENGTH 1.000 INCHES MINIMUM
TERMINAL DIAMETER 0.016 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH 0.150 INCHES NOMINAL
CASE MATERIAL PLASTIC
INSULATION RESISTANCE AT REFERENCE TEMP 100000.0 MEGOHMS
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT 0.0010
RELIABILITY INDICATOR NOT ESTABLISHED
TEST DATA DOCUMENT 81349-MIL-C-5 SPECIFICATION
SPECIFICATION/STANDARD DATA 81349-MIL-C-5/18D GOVERNMENT SPECIFICATION
III TERMINAL SURFACE TREATMENT SOLDER
(NON-CORE DATA) OVERALL LENGTH 0.300 INCHES MINIMUM AND 0.370 INCHES MAXIMUM
III INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP 5000.0 MEGOHM-MICROFARADS
(NON-CORE DATA) OVERALL HEIGHT 0.100 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
(NON-CORE DATA) OVERALL WIDTH 0.465 INCHES MAXIMUM
MANUFACTURERS CODE 81349
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE CM04ED560FP3
MANUFACTURERS CODE 81349
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE MILC5-18

Restrictions/Controls & Freight Information | NSN 5910-01-027-8094

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Category Code Description
No Freight Information