Product Details | ELECTROLYTIC FIXED CAPACITOR

5910-00-340-9666 A capacitor, whose capacitance value cannot be adjusted or varied, having a chemically formed film as the dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.

Part Alternates: M39006096470, M39006-09-6470, MILC390069, MILC39006-9, 5910-00-340-9666, 00-340-9666, 5910003409666, 003409666

Electrical and Electronic Equipment Components | Capacitors

Supply Group (FSG) NSN Assign. NIIN
59 00-340-9666

Drawings & Photos | NSN 5910-00-340-9666


Cross Reference | NSN 5910-00-340-9666

Part Number Cage Code Manufacturer
M39006-09-6470 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
M39006/09-6880 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
M39006/09-8470 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
M39006/09-8675 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
M39006/22-0068 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
M39006/22-0286 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
M39006/22-0506 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
MIL-C-39006/09 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
MIL-C-39006/22 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
MIL-C-39006/9 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5910-00-340-9666

Technical Data | NSN 5910-00-340-9666

Characteristic Specifications
CAPACITANCE VALUE PER SECTION 33.000 MICROFARADS SINGLE SECTION
TOLERANCE RANGE PER SECTION -5.00 TO 5.00 PERCENT SINGLE SECTION
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION 15.0 DC SINGLE SECTION
NONDERATED OPERATING TEMP -55.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM
BODY STYLE 26B W/O MTG FACILITIES, AXIAL TERMINALS
BODY DIAMETER 0.219 INCHES MAXIMUM
BODY LENGTH 0.515 INCHES NOMINAL
SCHEMATIC DIAGRAM DESIGNATOR 3C ELECTRODE(S) GROUNDED TO CASE, W/GND TERMINAL
TERMINAL TYPE AND QUANTITY 2 UNINSULATED WIRE LEAD
TERMINAL LENGTH 1.500 INCHES NOMINAL
TERMINAL DIAMETER 0.025 INCHES NOMINAL
CASE MATERIAL METAL
CASE INSULATION MATERIAL PLASTIC
CAPACITIVE ELECTRODE MATERIAL TANTALUM
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT 12.5000
DC LEAKAGE AT REFERENCE TEMP 2.000 MICROAMPERES
ELECTRICAL POLARIZATION POLARIZED
RELIABILITY INDICATOR ESTABLISHED
RELIABILITY FAILURE RATE LEVEL IN PERCENT 0.1000
FEATURES PROVIDED HERMETICALLY SEALED CASE
TEST DATA DOCUMENT 81349-MIL-39006 SPECIFICATION
SPECIFICATION/STANDARD DATA 81349-MIL-C-39006/9 GOVERNMENT SPECIFICATION
III MIL-STD-1276 WIRE LEAD TYPE DESIGNATOR AN-3 AND C
III ANODE TYPE SOLID
III IMPEDANCE AT MINIMUM OPERATING TEMP IN OHMS 90.0
(NON-CORE DATA) OVERALL LENGTH 0.578 INCHES MAXIMUM
III DC LEAKAGE AT MAXIMUM OPERATING TEMP 2.0 MICROAMPERES
(NON-CORE DATA) OVERALL HEIGHT 0.219 INCHES MAXIMUM
(NON-CORE DATA) OVERALL WIDTH 0.219 INCHES MAXIMUM
MANUFACTURERS CODE 81349
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE MILC39006-9
MANUFACTURERS CODE 81349
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE M39006-09-6470

Restrictions/Controls & Freight Information | NSN 5910-00-340-9666

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Category Code Description
No Freight Information