Product Details | FILM FIXED RESISTOR

5905-01-582-0562 A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also ATTENUATOR, FIXED and RESISTOR, FIXED, COMPOSITION. Excludes carbon composition type resistors.

Part Alternates: RNR50H3001FSR36, 5905-01-582-0562, 01-582-0562, 5905015820562, 015820562

Electrical and Electronic Equipment Components | Resistors

Supply Group (FSG) NSN Assign. NIIN
59 05 FEB 2010 01-582-0562

Cross Reference | NSN 5905-01-582-0562

Part Number Cage Code Manufacturer
RNR50H3001FSR36 91637 VISHAY DALE ELECTRONICS, INC. DIV VISHAY ANGSTROHM & DALE

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5905-01-582-0562

Technical Data | NSN 5905-01-582-0562

Characteristic Specifications
RELIABILITY INDICATOR ESTABLISHED
ELECTRICAL RESISTANCE 3.000 KILOHMS EACH RESISTOR
RESISTANCE TOLERANCE IN PERCENT -1.000/+1.000 EACH RESISTOR
RELIABILITY FAILURE RATE LEVEL IN PERCENT 0.001
TERMINAL LENGTH 1.250 INCHES NOMINAL
BODY LENGTH 0.150 INCHES NOMINAL
POWER DISSIPATION RATING IN WATTS 0.050 FREE AIR
BODY DIAMETER 0.065 INCHES NOMINAL
AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER 175.0
AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER 125.0
SPECIAL FEATURES ITEM MEETS SPECIFICATION MIL-PRF-55182/7; TEMPERATURE COEFFECIENT OF RESISTANCE IN PPM PER DEG CELIUS -50DEG C TO 50.0DEG C
TERMINAL TYPE WIRE LEAD
STYLE DESIGNATOR AXIAL TERMINAL EACH END
TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS -55.0/+175.0 TEMP RANGE OF FIRST TEMP COEFFICIENT
END ITEM IDENTIFICATION RHWR LBRRX, HBRRX AND 30FF FRFHS + HEAD AMP AND ZEUS RF/ IF CONVERTER
INCLOSURE METHOD ENCAPSULATED

Restrictions/Controls & Freight Information | NSN 5905-01-582-0562

Category Code Description
Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Demilitarization Code:QStrategic List Item (SLI). Demilitarization not required. SLI are non-MLI(Munitions List Items) controlled by the U.S. Dept. of Commerce through the Export Administration Regulations (EAR) and indicated on the Commerce Control List (CCL). Each CCL entry is preceded by a four-digit Export Control Commerce Control List Item (CCLI) – MUT to the point of scrap required outside the United States. Inside the United States, MUT is required when the DEMIL integrity code (IC) is “3” and MUT is not required when the DEMIL IC is “6.”
Electro-static Discharge Susceptible:BESD sensitivity
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
No Freight Information