Product Details | RADIO RECEIVER-TRANSMITTER

5820-01-479-4087 A single component capable of performing the functions of a RECEIVER, RADIO; and TRANSMITTER, RADIO.20358200061Radio and Television Communication Equipment, Except Airborne58210054Radio and Television Communication Equipment, Airborne

Part Alternates: ICM45EURO, IC-M45EURO, 5820-01-479-4087, 01-479-4087, 5820014794087, 014794087

Communication, Detection, and Coherent Radiation Equipment | Radio and Television Communication Equipment, Except Airborne

Supply Group (FSG) NSN Assign. NIIN
58 19 OCT 2000 01-479-4087

Cross Reference | NSN 5820-01-479-4087

Part Number Cage Code Manufacturer
IC-M45EURO 62526 ICOM AMERICA, INCORPORATED

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5820-01-479-4087

Technical Data | NSN 5820-01-479-4087

Characteristic Specifications
DC VOLTAGE RATING 13.8 VOLTS NOMINAL
POWER OUTPUT 25.000 WATTS NOMINAL
INPUT FREQUENCY RATING 156.025 MEGAHERTZ MINIMUM AND 163.275 MEGAHERTZ MAXIMUM
SPECIAL FEATURES TRANSMITTER FREQUENCY 156.025 - 157.425 MHZ; ALL USA, INTERNATIONAL, CANADIAN AND 10 WEATHER CHANNELS AVAILABLE; FM MODE (16K0G3E); 13.8VDC POWER SUPPLY; CURRENT DRAIN AT 13.8VDC - TRANSMITTER: LESS THAN 6A, RECEIVER: 1.2A MAX. AUDIO); 50 OHM (SO-239) ANTENNA CONNECTOR; VARIABLE REACTANCE PHASE MODULATION; LESS THAN -70DB SPURIOUS EMMISSIONS; 60DB CHANNEL POWER ADJUSTMENT; DOUBLE-CONVERSION SUPERHETERODYNE RECEIVER SYSTEM; 1ST 30.85MHZ AND 2ND 450MHZ INTERMEDIATE FREQUENCIES; 70 DB TYPICAL SPURIOUS RESPONSE REJECTION RATIO; 4 OHMS AUDIO OUTPUT IMPEDANCE

Restrictions/Controls & Freight Information | NSN 5820-01-479-4087

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:DMunitions List Item or Commerce Control List Item. Demilitarization required. Total destruction of the item and components so as to preclude restoration or repair to a usable condition by melting, cutting, tearing, scratching, crushing, breaking, punching, neutralizing, etc. (As an alternate, burial or deep water dumping may be used when coordinated with the DoD Demilitarization Program Office.)
Electro-static Discharge Susceptible:ANo known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
No Freight Information