Product Details | SHIM

5365-00-776-1521 A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.

Part Alternates: 938A642P2, 5365-00-776-1521, 00-776-1521, 5365007761521, 007761521

Hardware and Abrasives | Bushings, Rings, Shims, and Spacers

Supply Group (FSG) NSN Assign. NIIN
53 01 JAN 1962 00-776-1521

Drawings & Photos | NSN 5365-00-776-1521


Cross Reference | NSN 5365-00-776-1521

Part Number Cage Code Manufacturer
938A642P2 24446 GENERAL ELECTRIC CO
938A642P2 89954 BAE SYSTEMS CONTROLS INC.

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5365-00-776-1521

Technical Data | NSN 5365-00-776-1521

Characteristic Specifications
MATERIAL STEEL CORROSION RESISTING
CONSTRUCTION ONE-PIECE
BOLT HOLE QUANTITY 2
STYLE DESIGNATOR A16A NON-CIRCULAR W/SQUARE CORNERS
HOLE DIAMETER 0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM
OVERALL LENGTH 0.960 INCHES MINIMUM AND 0.980 INCHES MAXIMUM
OVERALL WIDTH 0.370 INCHES MINIMUM AND 0.390 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH 0.526 INCHES MINIMUM AND 0.536 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH 0.217 INCHES MINIMUM AND 0.222 INCHES MAXIMUM
BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE 0.185 INCHES MINIMUM AND 0.195 INCHES MAXIMUM
MANUFACTURERS CODE 89954
DESIGN CONTROL REFERENCE 938A642P2

Restrictions/Controls & Freight Information | NSN 5365-00-776-1521

Category Code Description
Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Precious Metals Indicator Code:UPrecious metal type is unknown
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 194160 WASHER OR GASKETS, IRON OR STEEL,
Less than car load rating U 50
Less than truck load rating U 50.0
Water commodity Code 713 unknown
Originating Activity Code XX
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity
Air Special Handling Z No special handling required.
Special Handling Code Z unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable