Product Details | ROD END CLEVIS

5340-01-398-7388 A forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.20210050018Guns, through 30mm53400020Hardware, Commercial

Part Alternates: 17G1304129, 17G130412-9, 5340-01-398-7388, 01-398-7388, 5340013987388, 013987388

Hardware and Abrasives | Hardware, Commercial

Supply Group (FSG) NSN Assign. NIIN
53 09 NOV 1994 01-398-7388

Drawings & Photos | NSN 5340-01-398-7388


Cross Reference | NSN 5340-01-398-7388

Part Number Cage Code Manufacturer
17G130412-9 88277 BOEING COMPANY, THE DBA BOEING

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5340-01-398-7388

Technical Data | NSN 5340-01-398-7388

Characteristic Specifications
MATERIAL STEEL COMP 303SE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION AMS 5640, TY 2 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD SERIES DESIGNATOR UNJF ROD END
NOMINAL THREAD SIZE 0.2500 INCHES ROD END
THREAD CLASS 3B ROD END
THREAD DIRECTION RIGHT-HAND ROD END
THREAD LENGTH 0.8750 INCHES NOMINAL ROD END
STYLE DESIGNATOR 16 CLEVIS
OVERALL HEIGHT 0.5000 INCHES NOMINAL
OVERALL WIDTH 0.5000 INCHES NOMINAL
END RADIUS 0.0600 INCHES NOMINAL
FORK SPAN WIDTH 0.1700 INCHES NOMINAL
DISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END 1.8750 INCHES NOMINAL
FORK DEPTH 0.7500 INCHES NOMINAL
HOLE SHAPE ROUND
HOLE DIAMETER 0.1950 INCHES MINIMUM AND 0.2050 INCHES MAXIMUM

Restrictions/Controls & Freight Information | NSN 5340-01-398-7388

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
No Freight Information

Management | NSN 5340-01-398-7388

Category Code Description
Materiel Management Aggregation CodeBATB:C-17 PROGRAM
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Budget CodeS 1557X3010:Aircraft Replenishment Spares
Source of SupplyF77Boeing Military Transportation Aircraft
Los Angeles, CA 90307-3044
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesJNOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative