Product Details | SPACING THREADED STANDOFF

5340-01-389-0120 A standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.

Part Alternates: 6711629002, 671-162-9002, 9532BA05402, 9532B-A-0540-2, 5340-01-389-0120, 01-389-0120, 5340013890120, 013890120

Hardware and Abrasives | Hardware, Commercial

Supply Group (FSG) NSN Assign. NIIN
53 14 APR 1994 01-389-0120

Drawings & Photos | NSN 5340-01-389-0120


Cross Reference | NSN 5340-01-389-0120

Part Number Cage Code Manufacturer
671-162-9002 64547 HONEYWELL INTERNATIONAL INC DBA HONEYWELL
9532B-A-0540-2 1YGB8 CAREY MANUFACTURING COMPANY, INC. DBA AMATOM ELECTRONIC HARDWARE

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5340-01-389-0120

Technical Data | NSN 5340-01-389-0120

Characteristic Specifications
MATERIAL ALUMINUM ALLOY 2011 OR ALUMINUM ALLOY 6061 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION QQ-A-225/3 T3 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-225/8 T6 FED SPEC 2ND MATERIAL RESPONSE OVERALL
SURFACE TREATMENT ANODIZE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION MIL-A-8625 TY 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
CROSS-SECTIONAL SHAPE ROUND
DIAMETER 0.250 INCHES NOMINAL
STYLE DESIGNATOR 22 PROJECTION ONE END LEFT INTERNAL THREAD
HOLE DIAMETER 0.148 INCHES MINIMUM AND 0.152 INCHES MAXIMUM
LENGTH 0.188 INCHES NOMINAL
RIGHT PROJECTION DIAMETER 0.185 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
RIGHT PROJECTION LENGTH 0.102 INCHES MINIMUM AND 0.108 INCHES MAXIMUM
THREAD SERIES DESIGNATOR UNC LEFT INTERNAL
NOMINAL THREAD SIZE 0.125 INCHES LEFT INTERNAL
THREAD QUANTITY PER INCH 40 LEFT INTERNAL
THREAD CLASS 2B LEFT INTERNAL
THREAD DIRECTION RIGHT-HAND LEFT INTERNAL
THREAD LENGTH 0.188 INCHES NOMINAL LEFT INTERNAL

Restrictions/Controls & Freight Information | NSN 5340-01-389-0120

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
No Freight Information

Management | NSN 5340-01-389-0120

Category Code Description
Materiel Management Aggregation CodeBATB:C-17 PROGRAM
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Budget CodeS 1557X3010:Aircraft Replenishment Spares
Source of SupplyF77Boeing Military Transportation Aircraft
Los Angeles, CA 90307-3044
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesMRESTRICTED REQUISITIONS-MAJOR OVERHAUL (Service/Agency use only.) # Items (Assemblies and/or component parts) which for lack of specialized tools, test equipment, etc., can be used only by major overhaul activities. Base, post, camp or station activities will not requisition unless authorized to perform major overhaul function.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative