Product Details | SPACING THREADED STANDOFF

5340-01-324-7702 A standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.

Part Alternates: NAS183003C06, NAS1830-03C06, 5340-01-324-7702, 01-324-7702, 5340013247702, 013247702

Hardware and Abrasives | Hardware, Commercial

Supply Group (FSG) NSN Assign. NIIN
53 22 AUG 1990 01-324-7702

Drawings & Photos | NSN 5340-01-324-7702


Cross Reference | NSN 5340-01-324-7702

Part Number Cage Code Manufacturer
NAS1830-03C06 80205 NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5340-01-324-7702

Technical Data | NSN 5340-01-324-7702

Characteristic Specifications
CROSS-SECTIONAL SHAPE HEXAGON
WIDTH ACROSS FLATS 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM
STYLE DESIGNATOR 22 PROJECTION ONE END LEFT INTERNAL THREAD
LENGTH 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM
SPECIFICATION/STANDARD DATA 80205-NAS1830 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
(NON-CORE DATA) FIRST PROJECTION LENGTH 0.132 INCHES MINIMUM AND 0.138 INCHES MAXIMUM
(NON-CORE DATA) FIRST PROJECTION DIAMETER 0.185 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
(NON-CORE DATA) FIRST INTERNAL THREAD CHARACTERISTICS 0.112-40 UNC-2B
(NON-CORE DATA) FIRST PROJECTION HOLE DIAMETER 0.148 INCHES MINIMUM AND 0.153 INCHES MAXIMUM
(NON-CORE DATA) MATERIAL STEEL, ASTM A108 OR STEEL, SAE 1018
(NON-CORE DATA) SURFACE TREATMENT CADMIUM, QQ-P-416, TYPE 2, CLASS 2

Restrictions/Controls & Freight Information | NSN 5340-01-324-7702

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 095190 HARDWARE, NOI SUB 9
Less than car load rating
Less than truck load rating Q 70.0
Water commodity Code 713 unknown
Originating Activity Code KH Defense Industrial Supply Center
Philadelphia, PA 19111
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity B Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5340-01-324-7702

Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Materiel Management Aggregation CodeSXSX:AF SICA RESIDUAL MMAC-OC-ALC
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesJNOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each