NSN 5340-01-135-1536 65662-03402-102, 01-135-1536, 6566203402102
Product Details | ROD END CLEVIS
5340-01-135-1536 A forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.20210050018Guns, through 30mm53400020Hardware, Commercial
Part Alternates: 65662-03402-102, 5340-01-135-1536, 01-135-1536, 5340011351536, 6566203402102, 011351536
Hardware and Abrasives | Hardware, Commercial
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | 18 JUL 1982 | 01-135-1536 | 03796 ( CLEVIS, ROD END ) |
Drawings & Photos | NSN 5340-01-135-1536
Demand History | NSN 5340-01-135-1536
| Part Number | Request Date | QTY | Origin |
|---|---|---|---|
| 65662-03402-102 | 2024-10-301 | 21 | DIBBS |
| 65662-03402-102 | 2024-03-67 | 21 | DIBBS |
| 65662-03402-102 | 2024-02-51 | 19 | DIBBS |
| 65662-03402-102 | 2020-02-57 | 2 | DIBBS |
| 65662-03402-102 | 2020-01-27 | 2 | DIBBS |
| 65662-03402-102 | 2019-11-310 | 2 | DIBBS |
| 65662-03402-102 | 2019-08-240 | 58 | DIBBS |
| 65662-03402-102 | 2019-05-122 | 20 | DIBBS |
| 5340-01-135-1536 | 2018-11-316 | 38 | DIBBS |
| 5340-01-135-1536 | 2018-02-37 | 85 | DIBBS |
| 5340-01-135-1536 | 2017-10-304 | 60 | DIBBS |
| 5340-01-135-1536 | 2017-03-68 | 23 | DIBBS |
| 5340-01-135-1536 | 2014-08-226 | 24 | DIBBS |
| 5340-01-135-1536 | 2014-08-215 | 24 | DIBBS |
| 5340-01-135-1536 | 2014-04-96 | 21 | DIBBS |
| 5340-01-135-1536 | 2013-03-79 | 35 | DIBBS |
| 5340-01-135-1536 | 2013-02-45 | 13 | DIBBS |
| 5340-01-135-1536 | 2012-11-307 | 12 | DIBBS |
| 5340-01-135-1536 | 2012-05-150 | 15 | DIBBS |
| 5340-01-135-1536 | 2012-03-74 | 10 | DIBBS |
| 5340-01-135-1536 | 2012-01-11 | 6 | DIBBS |
| 5340-01-135-1536 | 2008-12-351 | 25 | DIBBS |
| 5340-01-135-1536 | 2008-10-275 | 10 | DIBBS |
| 5340-01-135-1536 | 2008-02-36 | 6 | DIBBS |
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
Ernie G.
Honeywell
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
NSNs for Compare ( up to 4 ): Add 5340-01-135-1536
Related Products | NSN 5340-01-135-1536
Technical Data | NSN 5340-01-135-1536
| Characteristic | Specifications |
|---|---|
| MATERIAL | ALUMINUM ALLOY 7075 OVERALL |
| SURFACE TREATMENT | ANODIZE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THREAD SERIES DESIGNATOR | UNJF ROD CONNECTION |
| NOMINAL THREAD SIZE | 0.750 INCHES ROD CONNECTION |
| THREAD CLASS | 3B ROD CONNECTION |
| THREAD DIRECTION | RIGHT-HAND ROD CONNECTION |
| THREAD LENGTH | 0.550 INCHES NOMINAL ROD CONNECTION |
| STYLE DESIGNATOR | 23 CLEVIS |
| END RADIUS | 0.500 INCHES NOMINAL |
| OVERALL DIAMETER | 1.000 INCHES NOMINAL |
| FORK SPAN WIDTH | 0.495 INCHES NOMINAL |
| DISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END | 1.400 INCHES NOMINAL |
| FORK ARM THICKNESS | 0.125 INCHES NOMINAL |
| FORK DEPTH | 0.520 INCHES NOMINAL |
| SECURING PIN HOLE DIAMETER | 0.050 INCHES NOMINAL |
| MANUFACTURERS CODE | 78286 |
| DESIGN CONTROL REFERENCE | 65662-03402-102 |
Restrictions/Controls & Freight Information | NSN 5340-01-135-1536
| Category | Code | Description |
|---|---|---|
| Shelf-Life Code: | 0 | Nondeteriorative |
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
| Controlled Inventory Item Code: | U | UNCLASSIFIED |
| Precious Metals Indicator Code: | A | Item does not contain precious metal |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Automatic Data Processing Equipment: | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9) |
| Category | Code | Description |
|---|---|---|
| NMF Description | 094140 | CLEVISES IRON/STEEL |
| Less than car load rating | ||
| Less than truck load rating | U | 50.0 |
| Water commodity Code | 713 | unknown |
| Originating Activity Code | KE | Naval ICP Philadelphia, PA 19111 |
| Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
| Air Commodity | 2 | Arms/Weapons (all types including Inert Component Parts). When a 2 is indicated in the first position, then the special handling code must be determined from table 85 , part 1. |
| Air Special Handling | Z | No special handling required. |
| Special Handling Code | 9 | unknonwn |
| HAZMAT | ||
| Type of Cargo | Z | No special type of cargo code applicable |
Management | NSN 5340-01-135-1536
Navy| Category | Code | Description |
|---|---|---|
| Cognizance Codes | 9B | Navy-owned stocks of DLA material Naval Inventory Control Point, Mechanicsburg |
| Special Material Content | 9 | Non-Hazardous or Non-Sensitive Item, does not require hazardous or special handling, packaging or precautions |
| Source of Supply | SMS | Defense Logistics Agency Enterprise Business Systems |
| Agency | DN | Department of the Navy |
| Service Organization | N | U.S. Navy |
| Acquisition Advice Codes | D | DoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures. |
| Controlled Item Code | U | UNCLASSIFIED |
| Shelf Life Code | 0 | Nondeteriorative |
| Purchasing | QTY UOM |
1 EA : Each |