Product Details | ROD END CLEVIS

5340-00-998-3017 A forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.20210050018Guns, through 30mm53400020Hardware, Commercial

Part Alternates: CV155106105, CV15-510610-5, 5340-00-998-3017, 00-998-3017, 5340009983017, 009983017

Hardware and Abrasives | Hardware, Commercial

Supply Group (FSG) NSN Assign. NIIN
53 13 APR 1967 00-998-3017

Cross Reference | NSN 5340-00-998-3017

Part Number Cage Code Manufacturer
CV15-510610-5 80378 TRIUMPH AEROSTRUCTURES, LLC DBA TRIUMPH AEROSTRUCTURES - VOUGHT

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5340-00-998-3017

Technical Data | NSN 5340-00-998-3017

Characteristic Specifications
MATERIAL STEEL OVERALL
METALLIC HARDNESS RATING 33.0 MINIMUM ROCKWELL C AND 38.0 MAXIMUM ROCKWELL C
THREAD SERIES DESIGNATOR UNF ROD CONNECTION
NOMINAL THREAD SIZE 0.250 INCHES ROD CONNECTION
THREAD CLASS 3A ROD CONNECTION
THREAD DIRECTION LEFT-HAND ROD CONNECTION
THREAD LENGTH 0.630 INCHES NOMINAL ROD CONNECTION
SHANK LENGTH 1.150 INCHES NOMINAL
SHANK DIAMETER 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
OVERALL HEIGHT 1.070 INCHES NOMINAL
OVERALL WIDTH 0.550 INCHES NOMINAL
END RADIUS 0.350 INCHES NOMINAL
FORK SPAN WIDTH 0.313 INCHES MINIMUM AND 0.323 INCHES MAXIMUM
DISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END 3.230 INCHES NOMINAL
FORK ARM THICKNESS 0.118 INCHES NOMINAL
HOLE DIAMETER 0.189 INCHES MINIMUM AND 0.192 INCHES MAXIMUM
MANUFACTURERS CODE 80378
DESIGN CONTROL REFERENCE CV15-510610-5

Restrictions/Controls & Freight Information | NSN 5340-00-998-3017

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:UPrecious metal type is unknown
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 094140 CLEVISES IRON/STEEL
Less than car load rating
Less than truck load rating U 50.0
Water commodity Code 713 unknown
Originating Activity Code KE Naval ICP
Philadelphia, PA 19111
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity B Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5340-00-998-3017

Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Materiel Management Aggregation CodeSXSX:AF SICA RESIDUAL MMAC-OC-ALC
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesJNOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesJNOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each