NSN 5340-00-522-8160 LS45145, LS451-45, 00-522-8160
Product Details | NUT AND BOLT RETAINER
5340-00-522-8160 An item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
Part Alternates: LS45145, LS451-45, 5340-00-522-8160, 00-522-8160, 5340005228160, 005228160
Hardware and Abrasives | Hardware, Commercial
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | 01 JAN 1963 | 00-522-8160 | 16010 ( RETAINER, NUT AND BOLT ) |
Cross Reference | NSN 5340-00-522-8160
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| LS451-45 | 98897 | LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN AERONAUTICS |
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
Ernie G.
Honeywell
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
NSNs for Compare ( up to 4 ): Add 5340-00-522-8160
Related Products | NSN 5340-00-522-8160
Technical Data | NSN 5340-00-522-8160
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL |
| SURFACE TREATMENT | CADMIUM |
| OVERALL LENGTH | 2.158 INCHES NOMINAL |
| OVERALL WIDTH | 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM |
| MATERIAL THICKNESS | 0.050 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN CUP AND MOUNTING HOLE | 1.234 INCHES MINIMUM AND 1.266 INCHES MAXIMUM |
| WIDTH BETWEEN CUP FLATS | 0.442 INCHES MINIMUM AND 0.452 INCHES MAXIMUM |
| MANUFACTURERS CODE | 98897 |
| DESIGN CONTROL REFERENCE | LS451-45 |
Restrictions/Controls & Freight Information | NSN 5340-00-522-8160
| Category | Code | Description |
|---|---|---|
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
| Precious Metals Indicator Code: | U | Precious metal type is unknown |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Category | Code | Description |
|---|---|---|
| NMF Description | 095760 | LOCKS/LOCK SETS NOI METAL IN BBL/BX |
| Less than car load rating | Q | 70 |
| Less than truck load rating | Q | 70.0 |
| Water commodity Code | 713 | unknown |
| Originating Activity Code | XX | |
| Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
| Air Commodity | ||
| Air Special Handling | Z | No special handling required. |
| Special Handling Code | Z | unknonwn |
| HAZMAT | ||
| Type of Cargo | Z | No special type of cargo code applicable |