Product Details | PLAIN SOLID DISK

5340-00-500-9690 A circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.20310050018Guns, through 30mm53300028Packing and Gasket Materials53400020Hardware, Commercial

Part Alternates: 5009690, 5340-00-500-9690, 00-500-9690, 5340005009690, 005009690

Hardware and Abrasives | Hardware, Commercial

Supply Group (FSG) NSN Assign. NIIN
53 01 JAN 1963 00-500-9690

Cross Reference | NSN 5340-00-500-9690

Part Number Cage Code Manufacturer
5009690 19206 ARMY, UNITED STATES DEPARTMENT OF THE

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5340-00-500-9690

Technical Data | NSN 5340-00-500-9690

Characteristic Specifications
MATERIAL COPPER
MACHINED SURFACE FINISH SEMISMOOTH
DIAMETER 0.435 INCHES MINIMUM AND 0.440 INCHES MAXIMUM
THICKNESS 0.250 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
III FSC APPLICATION DATA GUN,76-MM,M1A1C AND M1A2

Restrictions/Controls & Freight Information | NSN 5340-00-500-9690

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:BMunitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.)
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
No Freight Information