Product Details | MANUAL CONTROL LEVER

5340-00-439-3087 A rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; and CLEVIS, ROD END; etc.. Excludes ARM (as modified); LEVER, REMOTE CONTROL; and BELL CRANK.20511150037Nuclear Warheads and Warhead Sections11250026Nuclear Demolition Charges11900057Specialized Test and Handling Equipment, Nuclear Ordnance30400042Miscellaneous Power Transmission Equipment53400020Hardware, Commercial

Part Alternates: SP28111, SP-2811-1, 5340-00-439-3087, 00-439-3087, 5340004393087, 004393087

Hardware and Abrasives | Hardware, Commercial

Supply Group (FSG) NSN Assign. NIIN
53 28 NOV 1969 00-439-3087

Cross Reference | NSN 5340-00-439-3087

Part Number Cage Code Manufacturer
SP-2811-1 08484 BREEZE-EASTERN CORPORATION

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5340-00-439-3087

Technical Data | NSN 5340-00-439-3087

Characteristic Specifications
END ITEM IDENTIFICATION MODEL 2A-100
SPECIAL FEATURES ALUM ALLOY,COMP 356-T6;ANODIZE PER MIL-A-8625,TY 2;0.562 IN. THK O/A BY 0.563 IN. LG;1.125 IN. DIA SHAFT END BY 0.939 IN. DIA ID W/0.127 IN. DIA HOLE THRU;0.375 IN. WD LEVER END W/0.125 IN. END RADIUS
FSC APPLICATION DATA CARGO RELEASE MECH
MANUFACTURERS CODE 08484
DESIGN CONTROL REFERENCE SP-2811-1

Restrictions/Controls & Freight Information | NSN 5340-00-439-3087

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:UPrecious metal type is unknown
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 013120 ALUMINUM ARTICLE NOI SUB 6
Less than car load rating
Less than truck load rating J 100.2
Water commodity Code 576 unknown
Originating Activity Code SE San Antonio Air Logistics Center
Kelly AFB, TX 78241-5000
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity
Air Special Handling Z No special handling required.
Special Handling Code Z unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5340-00-439-3087

Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Materiel Management Aggregation CodeJYSX:MISCELLANEOUS AIRCRAFT ACCESSORIES AND SYSTEMS
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesJNOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesJNOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each