NSN 5340-00-134-3843 2060315776, 206-031-577-6, 00-134-3843
Product Details | ROD END CLEVIS
5340-00-134-3843 A forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.20210050018Guns, through 30mm53400020Hardware, Commercial
Part Alternates: 2060315776, 206-031-577-6, 5340-00-134-3843, 00-134-3843, 5340001343843, 001343843
Hardware and Abrasives | Hardware, Commercial
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | 25 AUG 1969 | 00-134-3843 | 03796 ( CLEVIS, ROD END ) |
Drawings & Photos | NSN 5340-00-134-3843
Demand History | NSN 5340-00-134-3843
| Part Number | Request Date | QTY | Origin |
|---|---|---|---|
| 5340-00-134-3843 | 2013-07-203 | 220 | DIBBS |
| 5340-00-134-3843 | 2011-12-342 | 197 | DIBBS |
| 5340-00-134-3843 | 2011-11-319 | 332 | DIBBS |
| 5340-00-134-3843 | 2011-10-300 | 500 | DIBBS |
| 5340-00-134-3843 | 2011-09-245 | 133 | DIBBS |
| 5340-00-134-3843 | 2011-08-224 | 600 | DIBBS |
| 5340-00-134-3843 | 2010-04-113 | 169 | DIBBS |
| 5340-00-134-3843 | 2010-04-111 | 168 | DIBBS |
| 5340-00-134-3843 | 2010-04-105 | 155 | DIBBS |
| 5340-00-134-3843 | 2010-04-103 | 156 | DIBBS |
| 5340-00-134-3843 | 2010-04-100 | 144 | DIBBS |
| 5340-00-134-3843 | 2010-04-96 | 144 | DIBBS |
| 5340-00-134-3843 | 2010-04-92 | 117 | DIBBS |
| 5340-00-134-3843 | 2010-03-84 | 152 | DIBBS |
| 5340-00-134-3843 | 2010-03-82 | 150 | DIBBS |
| 5340-00-134-3843 | 2010-03-77 | 151 | DIBBS |
| 5340-00-134-3843 | 2010-03-75 | 152 | DIBBS |
| 5340-00-134-3843 | 2010-03-70 | 150 | DIBBS |
| 5340-00-134-3843 | 2010-03-68 | 151 | DIBBS |
| 5340-00-134-3843 | 2010-03-64 | 146 | DIBBS |
| 5340-00-134-3843 | 2010-02-56 | 144 | DIBBS |
| 5340-00-134-3843 | 2010-02-54 | 147 | DIBBS |
| 5340-00-134-3843 | 2010-02-50 | 144 | DIBBS |
| 5340-00-134-3843 | 2010-02-48 | 146 | DIBBS |
| 5340-00-134-3843 | 2010-02-40 | 147 | DIBBS |
| 5340-00-134-3843 | 2010-02-36 | 144 | DIBBS |
| 5340-00-134-3843 | 2010-01-28 | 76 | DIBBS |
| 5340-00-134-3843 | 2010-01-26 | 74 | DIBBS |
| 5340-00-134-3843 | 2010-01-22 | 77 | DIBBS |
| 5340-00-134-3843 | 2010-01-20 | 77 | DIBBS |
| 5340-00-134-3843 | 2010-01-14 | 76 | DIBBS |
| 5340-00-134-3843 | 2010-01-12 | 77 | DIBBS |
| 5340-00-134-3843 | 2010-01-08 | 79 | DIBBS |
| 5340-00-134-3843 | 2010-01-06 | 79 | DIBBS |
| 5340-00-134-3843 | 2009-12-358 | 90 | DIBBS |
| 5340-00-134-3843 | 2009-12-356 | 79 | DIBBS |
| 5340-00-134-3843 | 2009-12-352 | 75 | DIBBS |
| 5340-00-134-3843 | 2009-12-350 | 75 | DIBBS |
| 5340-00-134-3843 | 2009-06-168 | 85 | DIBBS |
| 5340-00-134-3843 | 2009-04-120 | 140 | DIBBS |
| 5340-00-134-3843 | 2009-03-84 | 78 | DIBBS |
| 5340-00-134-3843 | 2009-03-72 | 81 | DIBBS |
| 5340-00-134-3843 | 2008-10-289 | 61 | DIBBS |
| 5340-00-134-3843 | 2008-05-143 | 16 | DIBBS |
| 5340-00-134-3843 | 2008-02-56 | 300 | DIBBS |
| 5340-00-134-3843 | 2008-02-52 | 8 | DIBBS |
Cross Reference | NSN 5340-00-134-3843
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 206-031-577-6 | 97499 | BELL HELICOPTER TEXTRON INC. |
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
Ernie G.
Honeywell
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
NSNs for Compare ( up to 4 ): Add 5340-00-134-3843
Related Products | NSN 5340-00-134-3843
Technical Data | NSN 5340-00-134-3843
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL COMP 4130 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758,COND D4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| STYLE DESIGNATOR | 14 CLEVIS |
| SHANK LENGTH | 1.590 INCHES NOMINAL |
| SHANK DIAMETER | 0.309 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| OVERALL WIDTH | 0.625 INCHES NOMINAL |
| END RADIUS | 0.312 INCHES NOMINAL |
| FORK SPAN WIDTH | 0.135 INCHES MINIMUM AND 0.149 INCHES MAXIMUM |
| DISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END | 2.360 INCHES NOMINAL |
| FORK ARM THICKNESS | 0.110 INCHES NOMINAL |
| FORK DEPTH | 0.400 INCHES MINIMUM AND 0.665 INCHES MAXIMUM |
| SHANK SHOULDER DIAMETER | 0.495 INCHES MINIMUM AND 0.499 INCHES MAXIMUM |
| SHANK SHOULDER LENGTH | 0.190 INCHES NOMINAL |
| SECURING PIN HOLE DIAMETER | 0.131 INCHES MINIMUM AND 0.136 INCHES MAXIMUM |
| DISTANCE FROM CENTER OF SECURING PIN HOLE TO ROD END | 0.150 INCHES NOMINAL |
| HOLE DIAMETER | 0.194 INCHES MINIMUM AND 0.330 INCHES MAXIMUM |
| SPECIAL FEATURES | FORK BASE TAPERED 30 AND PIVOT PIN HOLES ARE DIFFERENT |
| MANUFACTURERS CODE | 97499 |
| DESIGN CONTROL REFERENCE | 206-031-577-6 |
Restrictions/Controls & Freight Information | NSN 5340-00-134-3843
| Category | Code | Description |
|---|---|---|
| Shelf-Life Code: | 0 | Nondeteriorative |
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
| Controlled Inventory Item Code: | U | UNCLASSIFIED |
| Precious Metals Indicator Code: | U | Precious metal type is unknown |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Category | Code | Description |
|---|---|---|
| NMF Description | 094140 | CLEVISES IRON/STEEL |
| Less than car load rating | ||
| Less than truck load rating | U | 50.0 |
| Water commodity Code | 713 | unknown |
| Originating Activity Code | KZ | Defense Supply Center Philadelphia Philadelphia, PA 19101 |
| Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
| Air Commodity | 2 | Arms/Weapons (all types including Inert Component Parts). When a 2 is indicated in the first position, then the special handling code must be determined from table 85 , part 1. |
| Air Special Handling | Z | No special handling required. |
| Special Handling Code | 9 | unknonwn |
| HAZMAT | ||
| Type of Cargo | Z | No special type of cargo code applicable |
Management | NSN 5340-00-134-3843
Army
Navy| Category | Code | Description |
|---|---|---|
| Materiel Category and Inventory Manager | T | Industrial Supplies (DLA/GSA Items) |
| Appropriation and Budget Activity | 2 | Stock Fund Secondary Items |
| Management Inventory Segment | 2 | NONREPARABLE ITEMS (Exclusive of Insurance and Provisioning Items). This code will be used to identify items which are not reparable. |
| Specific Group/Generic Code | B | Rotary Wing Aircraft |
| Weapons Systems/End Item or Homogeneous Group | BX | OH-58D Army Helicopter Improvement Program (AHIP) |
| Accounting Requirements Code | X | Expendable item. An item of Army property coded with an ARC of ?X? in the AMDF. Expendable items require no formal accountability after issue from a stock record account. Commercial and fabricated items similar to items coded ?X? in the AMDF are considered expendable items. |
| Source of Supply | SMS | Defense Logistics Agency Enterprise Business Systems |
| Agency | DA | Department of the Army |
| Service Organization | A | U.S. Army |
| Reparability | Z | This is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item. |
| Acquisition Advice Codes | D | DoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures. |
| Controlled Item Code | U | UNCLASSIFIED |
| Shelf Life Code | 0 | Nondeteriorative |
| Purchasing | QTY UOM |
1 EA : Each |
| Category | Code | Description |
|---|---|---|
| Cognizance Codes | 9B | Navy-owned stocks of DLA material Naval Inventory Control Point, Mechanicsburg |
| Source of Supply | SMS | Defense Logistics Agency Enterprise Business Systems |
| Agency | DN | Department of the Navy |
| Service Organization | N | U.S. Navy |
| Acquisition Advice Codes | D | DoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures. |
| Controlled Item Code | U | UNCLASSIFIED |
| Shelf Life Code | 0 | Nondeteriorative |
| Purchasing | QTY UOM |
1 EA : Each |