Product Details | GASKET

5330-01-024-7567 A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; and SPACER RING. Excludes DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; and RING, SEALING JAR.

Part Alternates: 5330-01-024-7567, 01-024-7567, 5330010247567, 010247567

Hardware and Abrasives | Packing and Gasket Materials

Supply Group (FSG) NSN Assign. NIIN
53 01-024-7567

Drawings & Photos | NSN 5330-01-024-7567


Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5330-01-024-7567

Technical Data | NSN 5330-01-024-7567

Characteristic Specifications
MATERIAL ASBESTOS CHRYSOTILE AND RUBBER NATURAL OR RUBBER SYNTHETIC OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION HH-P-46,CL 1 FED SPEC ALL MATERIAL RESPONSES OVERALL
CROSS-SECTIONAL SHAPE STYLE F33 SOLID SINGLE OR COMPOSITION NONMETALLIC MATERIAL
CROSS-SECTIONAL THICKNESS 0.062 INCHES NOMINAL
HOLE DIAMETER 0.188 INCHES NOMINAL
OVERALL LENGTH 7.062 INCHES NOMINAL
OVERALL WIDTH 6.000 INCHES NOMINAL
APERTURE WIDTH 5.000 INCHES NOMINAL
APERTURE LENGTH 6.062 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH 1.334 INCHES NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH 1.000 INCHES NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH 1.062 INCHES NOMINAL
BOLT HOLE QUANTITY 16
SPECIAL FEATURES 0.188 IN. DISTANCE FROM EDGE OF GASKET TO CENTER OF BOLT HOLES
III TEMP RATING 600.0 DEG FAHRENHEIT

Restrictions/Controls & Freight Information | NSN 5330-01-024-7567

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Category Code Description
No Freight Information