Product Details | GASKET

5330-00-133-0265 A deformable material which prevents the passage of matter through the joint formed when two faces are joined. It may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. It may be made to any predetermined dimension and shape. Excludes flat disks, items made of felt material and items having joints. For round metal and plastic items with an aperture and a solid rectangular cross section, see WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; and SPACER RING. Excludes DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; and RING, SEALING JAR.

Part Alternates: 26-2029-501, 5330-00-133-0265, 00-133-0265, 5330001330265, 262029501, 001330265

Hardware and Abrasives | Packing and Gasket Materials

Supply Group (FSG) NSN Assign. NIIN
53 00-133-0265

Drawings & Photos | NSN 5330-00-133-0265


Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5330-00-133-0265

Technical Data | NSN 5330-00-133-0265

Characteristic Specifications
MATERIAL ASBESTOS AND STEEL CORROSION RESISTING OVERALL
CROSS-SECTIONAL SHAPE STYLE F11 METAL AND NONMETALLIC MATERIALS
CROSS-SECTIONAL THICKNESS 0.075 INCHES NOMINAL
STYLE DESIGNATOR B18B NON-CIRCULAR
HOLE DIAMETER 0.266 INCHES MINIMUM AND 0.276 INCHES MAXIMUM
OVERALL LENGTH 2.375 INCHES NOMINAL
OVERALL WIDTH 2.375 INCHES NOMINAL
APERTURE DIAMETER 1.528 INCHES NOMINAL
OUTSIDE CORNER RADIUS 0.281 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH 1.807 INCHES MINIMUM AND 1.817 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH 1.807 INCHES MINIMUM AND 1.817 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH 0.279 INCHES MINIMUM AND 0.284 INCHES MAXIMUM
BOLT HOLE QUANTITY 4
MANUFACTURERS CODE 82918
DESIGN CONTROL REFERENCE 26-2029-501

Restrictions/Controls & Freight Information | NSN 5330-00-133-0265

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Category Code Description
No Freight Information